The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
2003 LANL Workshop
Dave Hrynkiw
February 18, 2003
We've got the official "OK" to open up registration for the 2003 LANL BEAM Workshop in Los Alamos, New Mexico. The 3-day workshop is from May 1-3, with the 1-day following on May 4. Check it out at any of the following links:
Direct IP link (until the following DNS entries echo through the web)
lanl.solarbotics.net
lanl.solarbotics.com
workshop.solarbotics.net
workshop.solarbotics.com
MORE POSTS
BEP Application: Servocore Walker
Solarbotics looking for fun people
...oh, and they also should want to work with us. We have a few positions open we want to fill with people that have a good sense of humour, have some geek qualities, and can tell the difference between a diode and resistor (or sincerely want to learn!) Here are the types of people we're […]
Phone Support Unavailable
Due to a shortage of staff and the Calgary Mini Maker Faire this weekend, we will unfortunately be unable to take your calls at this time. Sales & support can still be reached at sales@solarbotics.com & support@solarbotics.com, however responses may be a bit delayed.
Protected: 3D Printer Training - 3D Prin...
There is no excerpt because this is a protected post.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.