We're back from the Open Source Hardware Summit and the Maker Faire! Did lots; learned lots; got lots of touristy things done too. One of the main highlights was meeting and listening to talks by three of the principle members of the Arduino team. They took pity on English-speakers, and named the new revision the […]
2002 LANL Workshop in the works...
Dave Hrynkiw
February 25, 2002
Word from up the pipe at the Los Alamos National Laboratories is that the 10th Annual BEAM workshop is slated to happen May 2-4, 2002 at the Betty Ehart Center in Los Alamos, New Mexico (same place as the 1999 workshop).
Thanks to Joe Vigil (of LANL) who spearheaded the initiative after Paul Argo (the previous organizer) left for other opportunities. This is doubly-impressive, as Mark Tilden (who no longer is at LANL) is still willing to drop by and give a lecture.
So those are the tentative details. Solarbotics will be arranging the registrations for the event, so we we'll be posting a link to a registration database soon. Don't bother asking for more information - this is all we know at the moment. We'll post updates as we get them, and will have the link up for registrations in another day or so.
MORE POSTS
Another New Gearmotor - The GM19!
Here's a funky motor for you - the GM19! Slightly larger than the other metal gearhead series (GM11-14), and with a larger motor, this 35:1 beasty looks like a good contender for building mini-sumos or other small, speed-hungry robots! But be warned: It is a bit strange. The gearhead is mounted askew to the motor, […]
MakeFashion Tech Gala Photos
Solarbotics just attended the MakeFashion Gala here in Calgary. It was a glowing show of glowing lights and wearable technology. Check out the photos in our Flickr stream. Photo courtesy George Dimitrov Photography Among all the other wonderful things we've seen using our string LEDs before, there was nothing quite as intense as these outfits. […]
Friday New Product: eSun Filament, Push ...
Today we have a rainbow of colorful stuff, which apparently doesn't look anything like it at the moment, but believe me, it is. eSun 1.75mm PLA filament - 1kg Spool $30.00 1.75mm PLA filament for 3D printing. PLA is an excellent general purpose filament with a great finish, very rigid and biodegradable. eSun 1.75mm ABS […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.