Hi!
2001 Solar Cell Analysis Data - Direct S...
Dave Hrynkiw
July 12, 2007
| Overview | ||
| At Solarbotics, we've been getting quite a few questions regarding the "real-world" performance of our solarcells. Although we do have the official Panasonic Sunceram datasheets, it is written in a quite technical manner and does not include practical design data. With that in mind, we have generated the following - the first of three sets of data for use by the BEAM community. This first set of data is taken with direct-sunlight performance in mind. The second and third sets will be measured under halogen and incandescent lighting (stay tuned...). | ||
| Data Acquisition Procedure | ||
| Solarcell voltage across resistance values recorded on June 20 between 13:07 and 13:25. Solarcell capacitor charging values for capacitors between 1000uF and 4700uF recorded on June 22 Between 13:30 and 14:00.Solarcell capacitor charging values for capacitors between .047F and 1.0F recorded on June 25 between 13:25 and 14:10.Summer solstice on June 21, maximum sunlight at 13:37 (located in Calgary, Alberta, Canada).Testing apparatus consists of a basic stamp 2 for data logging and a ADC0831 chip for analog to digital conversion, 8 bit accuracy (0.02 volt resolution). When testing multiple resistive loads, relays were used to switch the load across the solarcell with a 200ms settle time. The basic stamp controlled sequencing and data logging by measuring the voltage across each switched load.When testing the charge rate of multiple capacitors, the capacitor was shorted by a relay for a period of five seconds, then released to charge by the solarcell. Voltage readings were taken between .2 and 5 seconds, depending on estimated total charge time. An 80% open voltage line is also indicated on the graphs. |
||
| Charge Times sorted by Solar Cell | ||
|
||
| Charge Times sorted by Capacitor | ||
| Solar Cell output under Resistance | ||
| Complete Data Sheet Download | ||
| For those of you who would rather have access to the complete data sheets and charts for the 2001 Solar Cell Analysis, we provide this information in the Microsoft Excel format.Solarcell Data Sheet A - 88KB Solarcell Data Sheet B - 388KB |
||
| Disclaimer: | ||
| Although the information is provided freely, we request that any reproduction or reference to the above data be included with proper accreditation to Solarbotics Ltd. Additionally, although we have performed these tests in good faith, we do not and cannot warrantee this data in any way. | ||
MORE POSTS
Zendulums for Japan - results!
We've wrapped up our "Zendulums for Japan" support drive, and we're happy to announce we've sold 84 kits for a total of $2,396.07. A donation of $2400 is being processed to Red Cross Japan. Thanks to all for assisting in our little effort to give some help!
New Product Friday: Vancouver Maker Fair...
So, as usual, we have some new product Friday goodness, but first we have a few questions for you to answer. Do you live in, around, or near Vancouver? Do you like weird and fantastical projects? Do you consider yourself a DIY type of person? Do you own a Space Armadillo named Norm, that you […]
Holiday Hours
Well it looks like that time of year when snow's in the air and we are out of the office for those precious holiday-tastic days. Over the next two weeks(ish) Solarbotics/HVWTech will be closed on the following dates: December 24th (Wednesday) December 25th (Thursday) December 26th (Friday) January 1st (Thursday) January 2nd (Friday) During this […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.