2001 Solar Cell Analysis Data - Direct S...

Dave Hrynkiw
July 12, 2007
  Overview
  At Solarbotics, we've been getting quite a few questions regarding the "real-world" performance of our solarcells. Although we do have the official Panasonic Sunceram datasheets, it is written in a quite technical manner and does not include practical design data. With that in mind, we have generated the following - the first of three sets of data for use by the BEAM community. This first set of data is taken with direct-sunlight performance in mind. The second and third sets will be measured under halogen and incandescent lighting (stay tuned...).
  Data Acquisition Procedure
  Solarcell voltage across resistance values recorded on June 20 between 13:07 and 13:25. Solarcell capacitor charging values for capacitors between 1000uF and 4700uF recorded on June 22 Between 13:30 and 14:00.Solarcell capacitor charging values for capacitors between .047F and 1.0F recorded on June 25 between 13:25 and 14:10.Summer solstice on June 21, maximum sunlight at 13:37 (located in Calgary, Alberta, Canada).Testing apparatus consists of a basic stamp 2 for data logging and a ADC0831 chip for analog to digital conversion, 8 bit accuracy (0.02 volt resolution). When testing multiple resistive loads, relays were used to switch the load across the solarcell with a 200ms settle time. The basic stamp controlled sequencing and data logging by measuring the voltage across each switched load.When testing the charge rate of multiple capacitors, the capacitor was shorted by a relay for a period of five seconds, then released to charge by the solarcell. Voltage readings were taken between .2 and 5 seconds, depending on estimated total charge time. An 80% open voltage line is also indicated on the graphs.
 
  Charge Times sorted by Solar Cell
 
  • SC2422 charging CP.33F, 2xCP.33F in series, CP1F and 2xCP1F in series (GIF)

  • SC2433 charging CP.33F, 2xCP.33F in series, CP1F and CP1F in series (GIF)

  • SC3733 charging CP.33F, 2xCP.33F in series, CP1F and CP1F in series (GIF)

  • SC3766 charging CP1000uF, CP3300uF (actual and estimate), CP4700uF (actual and estimate) (GIF)

  • 10xSCPD charging CP1000uF, CP3300uF (actual and estimate), CP4700uF (actual and estimate) (GIF)

  • 10xSCPD charging CP.047F Tokin capacitor (GIF)

 
  Charge Times sorted by Capacitor
 
  • CP.33F charged by SC2422, SC2433 and SC3733 (GIF)

  • 2xCP.33F in series charged by SC2422, SC2433 and SC3733 (GIF)

  • CP1F charged by SC2422, SC2433 and SC3733 (GIF)

  • 2xCP1F charged by SC2422, SC2433 and SC3733 (GIF)

 
  Solar Cell output under Resistance
 
  • Voltage vs Resistance for SC2422, SC2433, SC3733, SC3766 and SCPDx10 (GIF)

  • Current vs Resistance for SC2422, SC2433, SC3733, SC3766 and SCPDx10 (GIF)

  • Power vs Resistance for SC2422, SC2433, SC3733, SC3766 and SCPDx10 (GIF)

 
  Complete Data Sheet Download
  For those of you who would rather have access to the complete data sheets and charts for the 2001 Solar Cell Analysis, we provide this information in the Microsoft Excel format.Solarcell Data Sheet A - 88KB
Solarcell Data Sheet B - 388KB
 
  Disclaimer:  
  Although the information is provided freely, we request that any reproduction or reference to the above data be included with proper accreditation to Solarbotics Ltd. Additionally, although we have performed these tests in good faith, we do not and cannot warrantee this data in any way.

MORE POSTS

September 13, 2013
Friday New Shiny Product: SMD LED String...

We have a tricky product today. It pretends to be one, but it is actually ten. Is it like some sort of a mighty god with 10 avatars? Or a weird non-conventional 10-coloured rainbow? Close, it's the 10m lengths of LED strings that come in different colour variations, including an RGB one, which makes things […]

June 20, 2017
Solarbotics Takes Over Active-Tech Calga...

As of June 7, 2017, Active-Tech Calgary is now under the ownership of Solarbotics Ltd.! Solarbotics has been a part of the Calgary DIY Electronics community for over 22 years, manufacturing and reselling the kits, parts and pieces you use for your own creations. Active-Tech Calgary has been around slightly longer, supplying industrial electronics & […]

July 24, 2015
Friday New Product: Kossel Pro, SketchBo...

Today we have two superstars - the Kossel Pro 3D Printer and the SketchBoard. Both are relatively new add-ons to the Solarbotics website. Initially created as a Kickstarter project and designed around the OpenBeam aluminum extrusion system, Kossel Pro is now available for purchase. It comes with a spool of 1.75mm PLA filament (random color) […]

February 13, 2019
Zelda themed DIY LED Valentine's Day car...

Create an awesome Valentine's Day card with this DIY project! This card will surely bring a smile to the face of any die-hard Zelda gamer and showcases a fun way for beginners to make a unique DIY gift using simple items and cool electronics. You can really get creative by using strips of copper foil […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart