Regular Motor 2
RM2
2.25
USD
Qty
Price
1
$2.25 ea.
2+
$1.90 ea.
25+
$1.83 ea.
100+
$1.59 ea.
Need more power out of your gear motor? This is a high-power motor that fits in the same form factor as used by the GM2/3/8/9 style gear motors.
Description [Hide]
This 130 form-factor high-power motor fits in the GM2/3/8/9 series of gear motors, offering approximately 3 times the speed, twice the torque and quadruple the power-draw! Retrofitting the gear motor is easy - just remove the motor retainer strap, transfer the pinion gear, and reinstall - that's it!
NOTE: Be forewarned - we're not kidding about the increase in power requirements and output! This motor eats batteries quickly!
Now includes output shaft plastic pinion gear!
Documentation [Hide]
- [Data Sheet]: Motor Comparison Chart
You Might Also Like [Hide]
RM1A
Standard Motor
This "030" form factor motor replaces the old Mabuchi FF-030 we used to stock, and is still a good candidate for torquey Solarengine and small battery-powered robots.
$2.95 USD
RM3
Regular Motor 3 - 6V
This is the standard motor that is built into the GM2/3/8/9. Nominally runs at 6VDC and consumes roughly 35mA
$2.00 USD
GM9
Gear Motor 9 - 143:1 90 Degree Shaft
This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!
$5.75 USD
GM3
Gear Motor 3 - 224:1 90 Degree Shaft
This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!
$5.75 USD
19064
Mega Protoshield for Arduino
The Arduino Mega has LOTS of I/O. This Mega Protoshield by Adafruit breaks it all out for easy access and prototyping.
$15.95 USD
$0.20 USD
29038
Grove - UV Sensor
Monitor ultraviolet (UV) radiation in the 240mn-400mn range using the Grove interface system.
$10.70 USD
21061
Male-Female Jumper Wires 300mm (11.8") 22 AWG, 50 Pack
They're like little 30cm (11.8") high-quality extension cables for your breadboard. Actually, they ARE little 30cm high-quality extension cables for your breadboard!
$19.95 USD
28600
PicBit-18 Kit
The PicBit-18 Kit is an In-Circuit Serial Programming adapter for 18-Pin PICmicros.
$8.95 USD
TBLK2-100
2 Position Terminal Block 0.1" (0.254mm) Spacing
It's a SMALL terminal block, designed to mount in standard 0.1" (0.254mm) spaced holes. Ideal for permanent yet serviceable connections to microcontrollers.
$1.25 USD
Currency
Login
Privacy Policy Return Policies Terms Of Use
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.
© 1995-2019 Solarbotics Ltd.