Please note: This is a parts bundle, and to give you additional savings it does not come with documentation, free technical support or a 100% satisfaction guarantee. It's just a collection of parts! While the project instructions were published in MAKE Magazine or from MAKE issue 6, you can also get it online here.

You Might Also Like ^[Hide]

Make06SolarRoller

Make Volume 06 SolarRoller Bundle

If you want to build the SolarRoller found in Make Volume 06 SolarEngine Project 06, this is what you need!

$20.20 USD

60010

Instructables MSE Bundle - BattleSymet/MiniBall

This bundle contains the electronic components for building either the Miniball or Battle Symet Instructables.

$23.00 USD

SCC3733

37 x 33mm Monocrystalline Solar Cell

This epoxy-encapsulated monocrystalline solar cell offers 6.7V and 20mA in a 37x33mm package. Now updated with the Miller Engine circuit!

$8.00 USD

VPM2

Vibrating Disk Motor

The VPM2 is a replacement for the now unavailable venerable VPM. At 12mm dia x 3.4mm thick, it's smaller than the original, and has presoldered leads!

$3.95 USD

28930

Freeduino Starter Bundle - Basic

If you just want to dip your toe in the waters of FreeduinoLand (which is actually also known as "The Fabulous Republic of Arduino"), this basic bundle is what you're looking for.

$56.60 USD

SCPD

1/8" Square Solar Cell

These are small 1/8" square clear-epoxy encapsulated solar cells generating about 1/2 volt @ 1.9mA in sunlight.

$1.35 USD

K MSE

Solarbotics MSE Solar Engine Kit

For true DIY, hack the included cassette mechanism into a solar-powered device using the high performance Miller Solarengine which converts light into impressive bursts of energy! Rapid fire, SCC2433-MSE version.

$27.50 USD

60142

Northern Lights - SB-Firefly + Star Controller Bundle

It's a microcontroller kit. It's a 3 watt RGB LED kit. Put into a blender with an appropriate amount of solder and love, it turns into a microcontrolled Northern Lights RGB Bundle! This little guy can produce greens, violets, and teals that make you feel like you're north of the 49th parallel.

$36.75 USD

19010

16-Channel 12-bit PWM/Servo Shield - I2C interface

It's an independent 16-channel, 12-bit PWM chip breakout that's ideal for driving LEDs or servos over an I2C network. Pretty handy for "Set-it & forget-it" installations.

$17.50 USD

14230

4-Conductor LED Strip Clamp

Reduce the crazy soldering mess with these super useful RGB LED strip clamps!

$0.95 USD

Make Volume 06 Trimet Bundle

Make06Trimet