These new hard plastic wheels are specially designed for our GM2, GM3, GM8, GM9 and GM17 gear motor output shafts. Although usable as wheels, we often use these as mounts for legs and other mechanisms as they have convenient mounting holes that match our leg mounting pads.

They are 30mm in diameter, 7mm wide, and the double-flat slot fits onto the gear motor's shaft snugly.

Wheels are sold individually, and come with a screw and washer to secure it. Motor not included.

Documentation ^[Hide]

[Data Sheet]: Solarbotics GMW wheel IGES Model
[Data Sheet]: GMW dimensioned drawing (Imperial)
[Data Sheet]: GMW dimensioned drawing (Metric)

You Might Also Like ^[Hide]

GM2

Gear Motor 2 - 224:1 Offset Shaft

This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!

$5.75 USD

GM3

Gear Motor 3 - 224:1 90 Degree Shaft

This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!

$5.75 USD

GMB28

GM2/GM8 Gear Motor Bracket, Laser-Cut Steel

The GM2/GM8 gear motors have convenient holes for mounting, but these precision stamped-steel brackets add to their versatility!

$1.50 USD

SWT9

SPDT Snap Lever Switch

This SPDT snap lever switch is modifiable into tactile sensors.

$1.75 USD

K SV-PIC

Solarbotics Sumovore PIC Brainboard V2.0

Using one of the most popular styles of microcontrollers, this brainboard add-on replaces the standard discrete-logic brain with an established, powerful microcontroller! For use on select products.

$25.95 USD

K SV-Atmel

Solarbotics Sumovore Atmel Brainboard V2.0

This Sumovore add-on brainboard replaces the standard discrete logic brain with a powerful, programmable microcontroller! (Requires host product)

$20.95 USD

K SV-BS2

Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD

K TB

Solarbotics Turbot Tumbling Robot

The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!

$59.95 USD

23226

MinIMU-9 V5 - IMU Digital Combo Board - 9 Degrees of Freedom

This is a breakout combo for the LSM6DS33 3-axis gyro/3-axis accelerometer and an LIS3MDL 3-axis magnetometer. With this board, you get a full 9 degrees of freedom!

$16.91 USD

19068

USB Cable with Switch

Instead of yanking and plugging USB connectors, toggle the power with this short inline power switch.

$2.95 USD

GM2/3/8/9/17 Gear Motor mounts

GMW

Description ^[Hide]

Documentation ^[Hide]

You Might Also Like ^[Hide]

GM2

Gear Motor 2 - 224:1 Offset Shaft

GM3