GM Series Plastic Wheels
GMPW
3.25
USD
Qty
Price
1
$3.25 ea.
2-5/8" diameter wheels for the GM2/3/8/9 gear motor.
Description [Hide]
Take a Solarbotics GM2/3/8/9 style gear motor, add a spanky LARGE diameter wheel, and you've got a powerhouse combination that can take on any regular servo!
Solarbotics designed this injection-molded ABS wheel to fit the double-flat output shaft of the GM series gearmotors. Gone are the rubber bands, replaced by molded-on thermoplastic silicon tires with superior traction & wear characteristics!
What is really cool with this new design is the inclusion of a 64 strip pattern designed to match the popular "Wheel Watcher" optical encoders. Just paint in every other stripe pocket, and you're ready to go!
Need stats: Ok, here you go: The hubs dimension out at 69mm (just under 2-5/8"), by 7.62mm wide (0.3").
Wheels sold individually. Motor not included.
You Might Also Like [Hide]
GM3
Gear Motor 3 - 224:1 90 Degree Shaft
This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!
$5.75 USD
GM9
Gear Motor 9 - 143:1 90 Degree Shaft
This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!
$5.75 USD
GM2
Gear Motor 2 - 224:1 Offset Shaft
This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!
$5.75 USD
GMW
GM2/3/8/9/17 Gear Motor mounts
Auxiliary mounts for the GM2/3/8/9/17 gear motors. Image shows each side of wheel (not sold in sets of 2)
$1.25 USD
25030
Solarbotics Stamp Stack II Microcontroller Kit
The HVW Technologies' Stamp Stack II is a bread-board friendly, abuse-tolerant, Parallax BS2 100% compatible microcontroller.
$35.00 USD
K SV-Atmel
Solarbotics Sumovore Atmel Brainboard V2.0
This Sumovore add-on brainboard replaces the standard discrete logic brain with a powerful, programmable microcontroller! (Requires host product)
$20.95 USD
60100
Solarbotics Arduino Freeduino Enclosure (SAFE)
The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.
$9.95 USD
K TB
Solarbotics Turbot Tumbling Robot
The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!
$59.95 USD
PP2-50
50-Series Push Pogo Pin - 4-Sided Point
This smaller, 16.4mm long cone-tipped pogo/probe ping is normally used for electronic JTAG uses, but we use them for bots!
$1.50 USD
$0.20 USD
Currency
Login
Privacy Policy Return Policies Terms Of Use
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.
© 1995-2019 Solarbotics Ltd.