Gear Motor 23 - 1:192 Offset Shaft


5.00 USD
$5.00 ea.
$4.25 ea.

This 1:192 Tiny Geared Pager Motor has an offset shaft much like the GM2, but is roughly half the size in every dimension. We suspect that these were the motors used for the Magic school bus in it's miniature state.

Description [Hide]

Use this tiny lightweight gear motor for crazy things like wall climbing robots, automatic tooth-brushing, or fancy marble machines. These would also be great for competition Micro Sumobots or any other mini-robot for that matter. Make a robot so small that it can fit inside another robot!

Control this motor with a motor driver board such as the Secret motor driver kit or another small H-bridge connected to a small microcontroller such as an Ardweeny or Arduino Pro Mini.


Gear Ratio   : 1:192
Operating Voltage : 3.0V
Current draw (no load)
: 30~80mA
RPM (no load) : 100~410 rpm
Output Torque :
Weight : 3.7 g

Dimensions pictured in the third picture above.

You Might Also Like [Hide]


Gear Motor 24 - 1:192 90 Degree Shaft

Call it a teeny, tiny little brother to the GM3 gearbox. With a suitably smaller appetite for power!

$4.25 USD


Gear Motor 6 - 120:1 "Baby GM2"

The GM6 is a baby version of our popular GM2 gear motor.

$5.75 USD


Gear Motor 17 - 228:1 HE Offset Shaft

A High-Efficiency (HE) 3V DC motor coupled to a 228:1 gearbox give you a very useful low-power gearmotor!

$5.75 USD


Gear Motor 7 - 120:1 "Baby GM3"

The GM7 is a baby version of our popular right-angle drive GM3 gear motor.

$5.75 USD

K SV-Atmel

Solarbotics Sumovore Atmel Brainboard V2.0

This Sumovore add-on brainboard replaces the standard discrete logic brain with a powerful, programmable microcontroller! (Requires host product)

$20.95 USD


Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD


Solarbotics Arduino Freeduino Enclosure (SAFE)

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.

$9.95 USD


Solarbotics Turbot Tumbling Robot

The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!

$59.95 USD


PCA9306 Level Translator Breakout

Sometimes, voltages collide. When you have parts that expect/speak at different voltage levels, you have to build a mediator to smooth things out. This SparkFun BOB-10403 uses PCA9306 two-channel bidirectional voltage-level translator on a nice, small breakout board.

$6.95 USD


Evil Mad Science EggBot Pro

The fully assembled Egg-Bot PRO.

$325.00 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!