Lithium Ion Battery - 400mAh

50873

7.95 USD
Qty
Price
1
$7.95 ea.

3.7V 400mAh LiPoly battery with an excellent 2C discharge rate for small projects.


Description [Hide]

Small robots need small power sources, and this little 3.7V, 400mAh LiPoly unit from Sparkfun is a nice package able to push up to a 800mA load. It is pre-wired with the standard 2-pin 2mm JST-PH connector, and has built-in protection against over voltage, over current, and minimum voltage.

Still, there is no substitute for good battery management, so try to treat all LiPoly cells gently, and best to recharge them slowly rather than at their maximum rate with a proper LiPoly charger.

Dimensions: 5 x 25 x 35mm

Weight:  9g

Features:

  • 2C continuous discharge - very high for low price
  • Excellent long-term self-discharge rates (less than 8% per month)
  • Robust power source under extreme conditions (-25 to 60C)

** Please note: shipping restrictions on Lithium batteries limit the quantity we are able to ship in one order.

Documentation [Hide]

You Might Also Like [Hide]

HVJST2

2-pin JST-PH Connector (2.0 mm Pitch)

The 2-pin, 2mm pitch JST connector is often seen on Lithium Polymer (LiPoly) batteries. Use this when you need the board (male) connector, or need to mate to the female connector.

$0.65 USD

14180

7.5" PH 2.0 Battery wire - JST with Black / Red

JST connectors are tight & tidy, but not that easy to plug into, unless if you have some of these!

$0.95 USD

50891

3.7V 110mAh LiPoly battery for E-Textiles

What makes this battery special for E-textiles? Built-in current limiting for safety.

$6.95 USD

BattR15

Lithium Polymer Battery - 2000mAh (Lipo)

These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry.

$12.95 USD

50880

Polymer Lithium Ion Battery - 2200mAh 7.4v

This high discharge LiPo is a great way to power any R/C, robotic, or portable project. This is an excellent choice for anything that requires a small battery with a lot of punch.

$15.95 USD

R1.8M

1.8M Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

13156

AxiDraw V3

AxiDraw is a high performance personal writing and drawing machine.

$475.00 USD

50461

LilyPad Arduino Simple Board

This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in power supply socket, and an on/off switch.

$19.95 USD

14062

5V 2-Pin 50mm 50x50x10mm Brushless DC Cooling Fan

Need extra cooling for your embedded project? This is the ticket!

$4.99 USD

51804

Touch Board

Design with paintable sensors. Turn touch into sound and make any surface interactive.

$99.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!