For when you want to learn to code with Arduino more than you want to learn how to hook it up. Grove makes the wiring trivial, and our Sketchboard provides the power.
ESP8266, essentially in a tailored suit. It's so much easier to use with Grove-compatible wiring.
The Solarbotics Grove Education Pack is a complete bundle to teach a basic course in electronics and programming.
A functional kit that helps monitor the environment and care for plant growth!
Connect your Wii Nunchuck to your Grove based project!
Add WiFi to your Grove Project! Super Easy!
Grove Heart Rate Sensor Ear Clip that is perfect for experimentation!
Detect sound with this well-engineered Grove loudness sensor.
At the heart is a dual channel H-bridge driver chip that can handle current up to 2A per channel.
This isn't a plain outdoor thermometer - it has a range of -50 to 600°C.
The H3LIS331DL is a low power high performance 3-axis linear accelerometer belonging to the "nano" family, with digital I2C serial interface standard output.
Grove - Serial Camera Kit includes one control board and two interchangeable lenses, one standard lens and one wide-angle lens.
4 Pin jumper wire for easy Grove-to-Arduino connections.
Super easy LED and Driver for Grove.
Single Channel Relay for Grove
The Grove Base Shield is satisfyingly easy way to connect your Arduino to sensors, displays, and actuators.
Carrying a GrovePi+ board together with 12 carefully selected Grove sensors with 10 pieces cables, this starter kit gets you up and running with the Raspberry Pi quickly. Supports Linux / Windows IoT
Learn how to add Speech recognition to your home automation with this slick kit..
Detect sound strength with this well-engineered Grove sound sensor.
An small ESP8266 based SoC with full Grove Support, LiPo Support, and a mature API
Simple MP3 playback in a Grove interface. Plug it in, feed the audio signal to an amplifier, and you're listening to music.
The Grove MQ9 sensor specializes in sensing Carbon Monoxide, Methane, and Liquified Petroleum Gas vapour.
Ultrasonic distance sensor, featuring the plug-in-and-use Grove system.
Monitor ultraviolet (UV) radiation in the 240mn-400mn range using the Grove interface system.
Any project that requires talking to a standard 38kHz IR remote control will work well with this receiver.
Galvanic skin response measures the electrical conductance of skin. This Grove module makes it easy to measure the response across 2 fingers on a hand.
It's a ready-to-use touch sensor switch compatible with the Grove system. Plug it in, tuck it in behind a non-metallic surface, and you are finished.
An adjustable-sensitivity flame sensor, with Grove interface compatibility.
Detect carbon monoxide, alcohol, acetone, paint thinner, formaldehyde and other gasses with this plug-and-use Grove module.
Convenient plug-in-and-use Infrared emitter module for the Grove system.
I2C Color Sensor based on the TCS3414CS.
Use Grove to simplify your project, and in this case, to add LED strip lights. Drives both mono-colour and RGB styles, up to 3A per channel.
Grove - Mega Shield is a extension board for Arduino Mega and Google ADK.
On the rare occasion there isn't a Grove module for your project, build your own!
Have your Grove experiment display more information in more ways than just 2 lines of 16 characters of text. Have it change the background lighting of the LCD for additional feedback.
The Grove latching relays are interesting because they take a pulse to toggle their state, which it maintains even after a power cycle.
Amplified speaker output for the Grove prototyping system.
Grove-compatible circular 24 LED array, ideally used with a rotary encoder input.
The Grove PIR sensor is specifically tuned to detect the moving heat signatures of human bodies.
This grove unit is a simple way to add a rotation input device to your project.
No doubt the simplest and most flexible no-soldering way to start hacking with Arduino.
Before inexpensive microcontrollers, logic circuits did the bulk of electronic decision-making. The Mixer Pack makes it easy to play with simple "if-then" circuits without soldering.
Super simple - it's a ball in a tube that plugs into the Grove system to detect tilt.
Another nice visual indicator for the Grove system, with a 10 segment display. 3.3-5V
This simple Grove moisture sensor is ideal for measuring soil dampness.
This advanced Grove sensor breaks out into 4 touch sensor pads for finger proximity detection.
Inexpensive and well designed, it's handy for general light intensity measurements.
A simple but effective Grove water sensor. Expose the electrodes to a drop of water, and the signal drops very low. Can be used with both analog and digital ports.
Measure temperature and humidity with the pre-calibrated Grove TempHumi sensor.
The Grove Electricity sensor is a current transformer able to give your project the ability to measure up to 5A AC current.
The Grove HCHO sensor is a Volatile Organic Compound detector, able to detect down to 1 PPM.
The Grove MQ3 sensor specializes in sensing alcohol vapor do 0.04mg/l.
A handy Grove module thumb-joystick.
Seeed Grove connectors contain 2 signal lines. Drive 2 servos with a single port with this cable
The Grove system supports networking I2C devices, so connect them together with this linking cable.
Grove - Screw Terminal with four 3.5mm pitch pins
Grove Line Finder
4 digit displays are usually a 12 pin module. In this Grove gadget, we used a TM1637 to scale down the controlling pins into 2 Grove pins.
Grove Real Time Clock Calendar module.
This module is based on the I2C light-to-digital converter TSL2561.
For more precise environmental measurements using the Grove system.
Grove record and playback module.
Grove - LED String Light with voltage step up!
Interface Grove to DMX512 for control of stage lighting and effects.
For simple and easy temperature measurement using the 1-wire protocol with a prepared DS18B20 sensor.
A linear actuated potentiometer sandwiched between VCC and GND
Near Field Communications Tag in a Grove module.
Shorter than standard, these 5cm 4-conductor cables for connecting SeeedStudio's Grove modules together.
Grove - BLE (dual model) v1.0 uses CSR dual mode Bluetooth chip,with the ARM architecture single chip which supports AT instructions.
This Grove - GPS module is a cost-efficient GPS with serial interface.
Extra cables for Grove modules.
Easy way to measure external voltages within 1-43V.
Think of a Grove-compatible relay with no moving parts!
GrovePi+ is a system with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi.
Forgot Your Password?
Don't Have an Account?Sign Up!
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.