What's on the burner...

Dave Hrynkiw
November 17, 2009

We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready.

Solarbotics GVS ShieldProject One: The GVS Shield

We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a handy pinout "Ground / Vcc / Signal", which also describes most servo interfaces. It's turning into the general standard for most dedicated interfaces. So, to make use of these with an Arduino, we've put together our own GVS Shield.

We could have made it with a simple 3-row x  18 block of male pins, but that wouldn't fit the locking buckle-type connectors found on many Phidget and other accessory items. We're using nicely space, proper shielded pin plugs. Here are some design highlights:

  • D1, D2, Gnd pin connector for serial I/O
  • D2-D12 right-facing plugs
  • A0-A5 left-facing connection buckled plugs
  • Three 0.1µF decoupling capacitors
  • One 330µF electrolytic surge capacitor
  • "BlinkM" compatible I2C plug (shared with A4/A5 plugs)
  • Pin 13 LED & Reset brought up from main board

Arduino - very small!Project 2: The Ardweeny!

Yes, the name was a challenge. They didn't think I'd have the guts to follow through with the name, but it's just so suitable.

Our trial of the One-Chip ArduinoThis project is inspired by Kimio Kosaka's One Chip Arduino project, where he jams all the parts for an Arduino on top of the IC, and just plugs the IC into the breadboard directly.

This is an Arduino PCB designed reverse to most others. Instead of mounting the IC to the board, we're mounting the board to the IC (let me clarify...).

Put all the stuff on the top. Install looong leads through the rows on the outside edge. Jamb your ATMega328 in from the underside so the chip leads are pointing down, in the same direction os the long leads. Tack solder the chip leads to the long leads. Or not, if you think friction fit works.

Prototype ArdweenyDepending how you soldered the ATmega to the pins, you can either make it fit a 0.3" space header (where it straddles the breadboard centerline perfectly) or 0.4" wide (where it straddles the breadboard centerline, but uses up 1 extra empty hole next to the centerline).

Besides needing an FTDI cable, or SparkFun-like USB adapter/programmer, this will be a very inexpensive and compact way to do Arduino development. Stay tuned!

MORE POSTS

June 20, 2014
Friday New Product: LEDs, Battery Holder...

Product that is back in stock - is this considered old or new news? I say it's good, because it's a BrutusBot that has regained its chassis and the rest, came back from vacation and ready to take  over the world again:And we got some new stuff as well: Evil Mad Candle Flicker LED Assortment […]

February 19, 2002
BEP Documentation Correction... part 2!

Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.

June 30, 2003
Canada Day Holiday

Solarbotics will be closed for the July 1st Canada Day celebrations. We gotta let our people have fun some of the time...

January 13, 2009
I see the light!

When winter settles in around these parts, daylight doesn't seem to last too long. So like moths we tend to get excited about the new bright and shiny toys we bring in. Today we have Super Bright LEDs - they're the nifty little units we put in the HexPummer Lantern to create that extra pulse […]

1 2 3 252
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart