» Search » xbee module
This kit from Evil Mad Science works like an indoor sundial, but with three shadows of different length. This version comes with your choice of laser-cut Acrylic case.
This is easily the best and most complete audio playback module for hardware hacking we've seen. 16 trigger lines, 14 simultaneous playbacks - it's impressive.
PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C
True real-time distance measuring up to 2M away!
24 pins on 0.6" spacing - ideal for BS2 mounting!
This is a 3.3V Arduino running the 8MHz bootloader, in a very small package - a Mini Arduino, you might say!
The I2C-It is a great sensor, and is only more so when used as part of a greater chain. Use the I2C-It Cable harness and pin set to set up multiple sensors!
The Ground / Voltage / Signal standard is very popular, and our SB-GVS shield lets you easily tap these sensors into your Arduino!
Create your own Arduino-based designs, gain in-depth knowledge of the architecture of Arduino, and learn the user-friendly Arduino language all in the context of practical projects that you can build yourself at home.
The I2C-It is a great sensor, and is only more so when used as part of a greater chain. Use the I2C-It Cable harness to hook them up!
The Dimension Engineering 3.3V switching regulator is a tight & tidy voltage regulator that offers great performance at an excellent price. Great for extending battery life!
The Dimension Engineering 5V switching regulator is a tight & tidy voltage regulator that offers great performance at an excellent price. Great for extending battery life!
If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!
ESP8266, essentially in a tailored suit. It's so much easier to use with Grove-compatible wiring.
This BASIC Stamp 2 Carrier Board is compact and inexpensive.
With its 8 parallel-processing cogs, the Propeller chip's unique design makes a variety of otherwise difficult microcontroller applications relatively simple
The PCB C Compiler is an ANSI C compiler for 12-bit PICmicros.
The QTI Line Follower Kit adds line-following capability to the BoE-Bot.
This is a basic 16 character by 2 line display with a Blue background and a Yellow backlight.
The SparkFun Electric Imp breakout board makes it easy to experiment with your electric imp IoT project.
The ChronoDot RTC is an extremely accurate real time clock module, based on the DS3231 temperature compensated RTC (TCXO).
The Grove MQ9 sensor specializes in sensing Carbon Monoxide, Methane, and Liquified Petroleum Gas vapour.
The Precision Light Sensor measures human perceptible light level in lux.
These wireless transmitters work with 315MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.
These wireless receivers work with 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.
These wireless transmitters work with 434MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.
These wireless receivers work with 315MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.
Need a simple breakout for your Synapse modules? Use this kit for the application end of your Synapse Wireless RF networks. This kit will provide your Synapse node with 3.3V regulated power and break out all the nodal pins.
Create your own toys, remote controllers, alarms, detectors, robots, and many other projects with the Arduino device.
Pololu is known for some killer motor driver technology. They're bringing their mojo to the Arduino! Dual robust VNH5019 motor drivers take 5.5 to 24 V and punch out a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels.
You want to make this thing talk to that thing waaay over there? Try the SeeedStudio super-long range 433Mhz RF link bundle! They're claiming 2KM range for wireless data transport & remote control use!
Here is a motor controller that only needs 2 lines for control, it communicates serially via 2400 or 9600 Baud TTL signals. It's a smart controller that has a number of parameters that can be adjusted and can return valuable data such as speed & position.
Simon Monk writes another useful book about getting right into hacking electronics. Great for impatient builders!
No doubt the simplest and most flexible no-soldering way to start hacking with Arduino.
The Grove MQ3 sensor specializes in sensing alcohol vapor do 0.04mg/l.
Shorter than standard, these 5cm 4-conductor cables for connecting SeeedStudio's Grove modules together.
Carrying a GrovePi+ board together with 12 carefully selected Grove sensors with 10 pieces cables, this starter kit gets you up and running with the Raspberry Pi quickly. Supports Linux / Windows IoT
Extra cables for Grove modules.
4 Pin jumper wire for easy Grove-to-Arduino connections.
GrovePi+ is a system with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi.
Here's an addressable RGB strip with a kink - literally! Snake that strip around using the special S-curve PCB.
The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.
These modules allow reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Want to add ZigBee communications to your MAKE Controller? Here's the interface board you'll need!
It is the most easy and reliable way to connect the Xbee module to a PC via USB port.
This adapter board is designed to make adding wireless point-to-point or mesh networking easy. Adafruit looked at all the XBee adapter boards available and decided to design something better.
This board mates directly with the Arduino USB board and allows the Arduino to wirelessly communicate over a modified ZigBee protocol using the popular XBee module from MaxStream.
Easily add Class 2 Bluetooth to any of your Xbee enabled projects! This module allows your project to be up to 100 meters away.
Small, low-power, 2.4GHz plug-in 802.15.4 -based transmitter-receiver modules, with an extended range up to 2.5 miles and power consumption as low as 2.5uA.
What is a 'laser card' you ask? It is the coolest thing, like all things laser!
The Vinculum VMusic2 is a killer little module that lets you add USB drives and add MP3 playback to your microcontroller projects!
This Infrared Remote Decoder Module can receive and decode wireless infrared transmissions over a 38 kHz carrier wave. It can easily interface to a microcontroller such as an Arduino with only 3 pins (Power, Ground, & TX). Arduino sample decoding program available under Resources tab.
This is the basic laser card module with circuitry built in so that it can be turned on/off with a TTL signal.
Here's the official Arduino Ethernet Shield With PoE Module
The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller.
The BASIC Stamp 2p40 Module is a practical and powerful microcontroller for all kinds of embedded projects. Also makes Julienne fries!
Miniature RF (MiRF) 2.4GHz transceiver modules with built in antenna designed around the Nordic Semiconductor nRF2401A with high sensitivity and good range.
The uLCD-144(GFX) is a compact and cost effective stand-alone display module using the latest state of the art LCD (TFT) technology with an embedded GOLDELOX-GFX2 graphics processor. Powerful graphics, text, image, animation and countless more features are built inside the GOLDELOX-GFX2 chip.
The Pololu Wixel is a general-purpose programmable module featuring a 2.4GHz radio and USB.
The Raspberry Pi has the Camera Serial Interface, which this camera uses to great effect with high-speed and high resolution.
The Easy Bluetooth Serial Module is an effective and low-cost solution to free your hardware applications from wires.
The HM55B Compass Module is a dual axis field sensor that works by reading the earth’s magnetic field and determine the direction.
Trying to figure out where the heck you are? This GPS module might be what you need to keep you or your project from getting really lost.
The original BASIC Stamp 1 Module is still a practical and versatile microcontroller for all kinds of embedded projects.
The SN171 Synapse ProtoBoard is a very convenient way to connect any Synapse SNAP module to a RS232 port - ideal for playing with your new RF Engine!
It's a darn cute 2 line x 8 character display, ideal for tiny display applications.
The Devantech USB-I2C interface module makes it absurdly easy to access an I2C device through your USB interface
The MLX90614 Infrared Thermometer Module is an intelligent non-contact temperature sensor with a 10° field of view and a serial interface for easy connection to host microcontrollers.
Vacuum Fluorescent Display (VFD) technology provides superior visibility in high brightness and low temperature environments. This single +5VDC supply display will continue kicking even in the harsh cold of North American winters.
Yet another BASIC Stamp 2SX Module that's practical and powerful microcontroller for all kinds of embedded projects.
The BASIC Stamp 2e Module - Basic language interpreted, and a step up from the BS2
The BASIC Stamp 2pe serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more.
The BOB-4 OSD Module lets you put serial text on a video signal or generate a local video signal with text.
Transfer data via "Near Field Communication" with the SEEED Grove-compatible PN532 module
This sensor is able find objects and walls with ultimate precision and makes laser ranging technology finally affordable.
This is a very simple breakout board for the popular HMC6352.
The SOMO-14D is a tiny audio module that can play back stored audio files from a micro-SD memory card.
A module that allows microcontrollers systems like the PICAXE to display messages and images on a 128x64 GLCD (white on blue GLCD included)
This Parallax LCD is a bare-bones, non-back-lit serial module for simple display applications. But it doesn't actually have bones. That'd be gross and creepy.
This Parallax LCD is a bare-bones, back-lit serial module for simple display applications in a 4 line, 40 character mode! But it doesn't actually have bones. That'd be gross and creepy.
These displays show you crucial information. With the addition of a 25 key matrix interface you can change screens at the touch of a button.
This wireless transceiver module is an easy and suitable module if you want to setup your wireless communication system at a low cost.
The Sure Electronics 3-axis low-power accelerometer features only 10-bit (still good!) resolution, but the price is excellent!
Brand new and better than ever, we've replaced our Adafruit GPS shield kit with this assembled shield that comes with an Ultimate GPS module.
USB 4 line by 20 character Display with lots of features! White on blue.
We've now taken the popular IR decoding module from Sure Electronics and teamed it up with a matching remote all placed into one convenient package!
Better than XBee at a comparable cost! This module features the powerful ATmega128RFA1, transmitting on 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 4.8km (3 miles) range and an SMA antenna connector for optimum performance.
This Synapse Wireless 915 MHz RF wireless module runs at OTA (Over-The-Air) speeds up to 150Kbps and features tightly packed SMD construction with a chip antenna. These modules are perfect when you need a separate frequency band when already using 2.4GHz nodes in an application.
This module can be controlled with external circuit to quantify and record the brightness of ambient environment, thus providing a hardware infrastructure for intelligent controlling system that varies according to the ambient brightness.
Looking for 802.15.4 ZigBee-type module with smarts? XBee with more features? Check out Synapse modules! Small, low-power, 2.4 GHz plug-in transmitter-receiver modules, with an extended range up to three miles and power consumption as low as 2.5uA.
Basically a USB to WiFi interface, this breakout board offers an xbee style footprint that allows serial communication from an RN-XV module to your PC or Laptop.
XBee is good; Synapse is just better. More I/O, embedded python, and generally better range at comparable cost! This particular module is 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 2.5miles (~4km) range and a F-type PCB for compact installation.
Super cool project for those super human geek types.
This proto shield comes with a socket for wireless modules, such as the Digi XBee, and a built in regulator and a big ol' prototyping area.
This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield.
The 6DOF Atomic is a XBee-ready, stripped-down Inertia Measurement Unit, designed to give good performance at an affordable price. So get measuring rotation and translation, people!
Curious just how strong the gravitational forces are today? Check out this 3 Axis Accelerometer for your latest project.
Parallax has added Arduino to the popular "Board of Education" system. This shield allows for convenient breadboard prototyping and servo ports with your Arduino, with no soldering required. It'll also give you easy access to Parallax's breadboard-friendly sensors and accessories.
Sometimes it would be very nice to be able to add connectivity to your Arduino/Freeduino project. The Adafruit Ethernet shield kit lets you add network connectivity!
The BS2 Homework board is a very handy development board for your Basic Stamp 2 experiments.
Forgot Your Password?
Don't Have an Account?Sign Up!