Search For: xbee module


Show: Items

Sort By:


370 Products Found


51740

XBee WiFi Module - Wire Antenna

This is the XBee WiFi Module with wire antenna from Digi.

$43.95 USD

51710

XBee Module - 1mW Wire Antenna

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

$23.45 USD

51700

XBee Module - 1mW Chip Antenna

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

$25.45 USD

51730

XBee-PRO Module - 60mW Wire Antenna

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

$38.45 USD

50645

SparkFun Breakout Board for XBee Module

This is a simple breakout board for the popular XBee product from Maxstream.

$2.95 USD

27106

XBee Connector Pack

Includes all the components you need to plug the XBee Board into your Make Controller, and interface with sensors and actuators directly.

$8.00 USD

50835

XBee Shield

This new revision fixes some minor spacing and labeling issues, but functionality remains the same. The XBee Shield simplifies the task of interfacing an XBee with your Arduino.

$14.95 USD

39252

Solarbotics Synapse-XBee Adapter Kit

Ever want to change the species of your RF modules? Now you can evolve your XBees into Synapses! Well that doesn't really make sense but, hey, it doesn't change the fact that you can now do it with this kit!

$7.50 USD

50745

XBee Explorer Dongle

This is the XBee Explorer Dongle unit for the XBee line.

$24.95 USD

50828

SparkFun XBee Explorer Regulated

The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). This makes it SO much easier to start playing with XBee!

$9.95 USD

28670

PICAXE XBee Connect Board

The PICAXE Connect board lets you hook up a Digi XBee module or LocSense GPS module to your PICAXE or (using a MAX3232 chip) a computer.

$21.95 USD

50478

LilyPad XBee

The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.

$14.95 USD

51776

Synapse RF266PC1 - XBee Footprint, with Chip Antenna

Want to try Synapse, but only have XBee hardware? HAH - Synapse thought of that with their new RF266PC1. Synapse power in an XBee footprint!

$31.95 USD

50640

SparkFun XBee Explorer USB

This is a simple to use, USB to serial base unit for the XBee line.

$24.95 USD

29210

Roving Networks RN42-XV Class 1 Bluetooth - XBee Compatible

Easily add Class 1 Bluetooth to any of your Xbee enabled projects! This module allows your project to be up to 20 meters away.

$24.95 USD

50575

Laser Module Mount

Every laser needs a holder!

$4.95 USD

28606

VDrive2 USB Module

Add a USB drive or thumbdrive to your microcontroller!

$28.95 USD

50577

Laser Module - Green

A nice, compact 5mW green laser. Fun, but don't point in anyone's eyes.

$14.95 USD

40414

200W Buck Module

When mini buck converters just won't do, 200W should manage it nicely.

$16.90 USD

37000

EMIC 2 Text to Speech Module

Give your project a voice, and more than just pre-recorded messages on loop! The EMIC 2 takes a serial string and turns it into synthesized voice.

$59.99 USD

52090

Raspberry Pi Camera Module V2

New! This 8MP Camera Module replaces the older 5MP unit!

$40.00 USD

40420

MicroUSB 1A LiPoly Charging Module

Excellent for building a portable project with a single LiPoly, and recharge it from microUSB!

$2.25 USD

29196

Motor Speed Sensor Module

This is a speed sensor, designed to check the rate of a motor.

$2.95 USD

60550

Red LED Laser Diode Module

Compact, inexpensive, and LASER. Enough said.

$1.00 USD

28623

Serial OLED Module (20x4)

OLEDs are simply the next step up in display technology. Sure, a regular LCD may work, but you should use OLEDs when you need a much brighter display, much better viewing angle and lower current consumption!

$50.99 USD

28622

Serial OLED Module (16x2)

OLEDs are simply the next step up in display technology. Sure, a regular LCD may work, but you should use OLEDs when you need a much brighter display, much better viewing angle and lower current consumption!

$25.50 USD

17551

20 Second Sound Module

Think of this as a audio robotic digestive system. It'll eat 20 whole seconds of sound before barking it back at you with beautiful clarity, maybe not exactly as you remember it but pretty close!

$6.95 USD

52266

4-Channel 5V Relay Module

4-channel relay control board with optical isolation.

$12.95 USD

35174

Rotary Encoder module on PCB with breakout

Rotary Encoder module with integrated push button. Perfect addition to that Arduino project!

$3.50 USD

18210

LK202-25-WB Serial LCD Module

This 20 character by 2 line LCD, comes with an easy to use serial communication interface and has the capability to connect up to a 5 by 5 matrix style keypad.

$59.95 USD

30025

Roving Networks RN-XV Wi-Fi Module - Wire Antenna

What a sweet idea! A 802.11b/g wifi module with a XBee plugin footprint! This model uses a built in wire antenna.

$37.00 USD

29200

Roving Networks RN-XV Wi-Fi Module - UFL connector

What a sweet idea! A 802.11b/g wifi module with a XBee plugin footprint! This model features a UFL antenna connector.

$34.95 USD

29205

Roving Networks RN-XV Wi-Fi Module - SMA connector

What a sweet idea! A 802.11b/g wifi module with a XBee plugin footprint! This model features a SMA antenna connector.

$34.95 USD

30010

RS-232 Driver Module - DTE Version

The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DTE means it's configured as a "Data Terminal Equipment" (with 9 pins).

$11.95 USD

25070

BASIC Stamp 2 Module

The original BASIC Stamp 2 Module is still a practical and versatile microcontroller for all kinds of embedded projects.

$48.95 USD

31050

Ethernet-SPI/Bus Module

Add ethernet connectivity to your project with the Wiznet WIZ811MJ module. Ready to go on a convenient board!

$24.95 USD

33155

Parallax RFID Reader Module

The Parallax RFID Reader Module is a 125 kHz RFID reader.

$49.99 USD

28486

PICAXE-28X2 Module

This PICAXE-28X2 module contains a surface-mount 28X2(AXE201) chip, voltage regulator, download socket, and reset switch in a convenient 28 pin (0.6") format. Ideal for breadboarding work.

$21.00 USD

18080

LCD2041 Serial LCD Module

This 20 character x 4 line serial LCD module is identical to the LK204-25 model except that it does not have a keypad interface and only has 1 GPO.

$64.95 USD

30000

RS-232 Driver Module - DCE

The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DCE means it's configured as a "Data Communications Equipment" (with 9 holes).

$11.95 USD

25100

BASIC Stamp 2p24 Module

The BASIC Stamp 2p24 Module is a practical and powerful microcontroller for all kinds of embedded projects.

$78.95 USD

25140

BASIC Stamp 2px24 Module

The BASIC Stamp 2px24 Module is a practical (kind of like a screwdriver) and powerful (not at all like a giant missile) microcontroller for all kinds of embedded projects.

$78.95 USD

18690

AL162A-R Serial LCD Module

All MOS units can be directly connected to a microcontroller such as a PIC, BASIC Stamp, OOPic or PICAXE using the TTL interface.

$26.21 USD

33156

Parallax USB RFID Reader Module

The Parallax RFID Reader Module is a 125 kHz RFID reader, with a USB connection.

$49.99 USD

18100

LK162-12 Serial LCD Module

Slim and space efficient, this unit is used in a variety of industrial applications such as computer servers and web application control systems.

$49.95 USD

21410

Parallax 2x16 Back-lit LCD Module

This Parallax LCD is a bare-bones, back-lit serial module for simple display applications. But it doesn't actually have bones. That'd be gross and creepy.

$31.50 USD

29240

ESP-12F AP+STA Remote Serial Port WIFI Controller / Module

The ESP8266 (ESP-12F AP+STA) is a nice "Internet of Things" microcontroller with Wifi (or as a wifi bridge for your project)

$5.95 USD

30165

BOB-4-HGI OSD Module (NTSC & PAL) - 10 units min

The BOB-4-HG is the (header connector version) module for NTSC or PAL video.

$89.95 USD

40412

2A Booster DC-DC Step-Up module Micro USB Input 2V-24V to 5/9/12/28V

2A Booster DC-DC Step-Up module Micro USB Input 2V-24V to 5/9/12/28V

$4.95 USD

40408

DC-DC 2A Adjustable Boost Power Supply Converter Step Up Module 2-24v

This budget DC-DC boost converter cranks up input voltage from as low as 2V to an output as high as 28VDC

$3.95 USD

51765

Synapse RF200P81 with Chip Antenna

XBee is good; Synapse is just better. More I/O, embedded python, and generally better range at comparable cost! This particular module is 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 450M (1500') range and a chip antenna for compact installation.

$23.95 USD

51774

Synapse RF300PD1 with SMA Connector 915MHz

A module that runs at OTA (Over-The-Air) speeds up to 150Kbps and has a maximum transmission range of 3 miles! Perfect for when you need a separate frequency band when already using 2.4GHz nodes in an application. Just apply power and you've connected a mesh network.

$31.45 USD

51750

Synapse RF100PD6 with SMA Connector

Looking for 802.15.4 Zigbee-like device with smarts? XBee with more features? Check out Synapse modules! Small, low-power, 2.4 GHz plug-in transmitter-receiver modules, with an extended range up to three miles and power consumption as low as 2.5uA.

$25.00 USD

29246

AI-Thinker ESP8266 ESP-01 Wifi microcontroller

One of the cheapest "go-to" chipsets for building an "Internet of Things" device. With b/g/n Wifi and 8MBit Memory

$4.50 USD

39291

Getting Started with Synapse Bundle

A great introduction to starting out with Radio Frequency (RF) Networking. Use your computer to control a remote application or have the application control the computer. This bundle + guide will get you up and running with RF networking in a practical way.

$76.93 USD

29138

Seeed Grove - GPS

This Grove - GPS module is a cost-efficient GPS with serial interface.

$29.90 USD

29062

Grove - Ultrasonic Ranger

Ultrasonic distance sensor, featuring the plug-in-and-use Grove system.

$16.10 USD

52264

Dual Channel Relay Interface

Dual relay control on one board, with signal optical isolation.

$6.00 USD

39270

Solarbotics Synapse SMA X-Change Bundle

Want to try out a Synapse SNAP network where you have an Xbee network? Assemble this bundle and x-change your pre-existing Xbee hardware with this drop-in replacement.

$40.50 USD

50790

RFID Reader ID-12LA (125 kHz)

This is a very simple to use RFID reader module with a built in antenna. Power the module, hold up a card, and get a Serial string output containing the unique ID of the card.

$29.95 USD

39280

Solarbotics Synapse RF100PC6 Snap X-Change Bundle

Want to try out a Synapse SNAP network where you have an Xbee network? Assemble this bundle and x-change your pre-existing Xbee hardware with this drop in replacement.

$25.16 USD

50752

MP3 Player Shield

This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield.

$39.95 USD

51837

Wireless SD Shield

This Arduino shield rocks a socket for wireless modules, such as Digi Xbee, so that you can float your bits and bytes of data through air with the greatest of ease.

$29.15 USD

60119

"Big Red" Enclosure

This big, bright red plastic enclosure, that we affectionately call "Big Red", will give your projects the protection (and attention) they deserve. It will also keep your electronics safe and sound indoors or outdoors as it includes a convenient weatherproof seal!

$8.95 USD

29105

SeeedStudio Relay Shield

You want to move power? We've got the SeeedStudio Relay Shield that'll let the milliamperes of an Arduino-compatible board to control up to 35VDC 70W on 4 separate channels!

$24.95 USD

K SV-BS2

Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD

FPin10-2mm

Female 10 socket strip, 2mm spacing

Female Socket Strip - 10 per Strip, 2mm spacing

$1.00 USD

50515

SparkFun DC/DC Converter

Need a tidy DC-to-DC converter? This SparkFun breakout board offers 6 amperes of conversion, taking any DC voltage between 4.5-14VDC, and turning it to a selectable voltage between 0.59 and 5.5VDC.

$21.95 USD

35250

Parallax Board of Education Shield (for Arduino)

Parallax has added Arduino to the popular "Board of Education" system. This shield allows for convenient breadboard prototyping and servo ports with your Arduino, with no soldering required. It'll also give you easy access to Parallax's breadboard-friendly sensors and accessories.

$39.99 USD

25122

Spin Stamp Microcontroller

This spin stamp microcontroller has the same kind of form as the 24-pin BS2 modules. Please note that holding this module while on a spinny-ride will not decrease dizziness.

$49.95 USD

MPin12-2mm

2mm Pin Strip Single Row Header - 12 per

Male Strip - 12 per Strip, gold flash on 2mm spacing

$1.00 USD

29110

Seeedstudio Bluetooth Bee

Bluetooth! XBee! Arrgh - which way to go? Well, the Bluetooth Bee lets you jam a Bluetooth SPP module into an existing Xbee socket ed project!

$23.95 USD

51770

Synapse RF220UF1

Better than XBee at a comparable cost! This module features the powerful ATmega128RFA1, transmitting on 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 4.8km (3 miles) range, and switchable internal /external antenna.

$29.95 USD

51605

0.97mm 9-Tooth Pinion

Didel Module 0.3 Gears - 9-Tooth pinion, 0.97mm bore for 1mm shaft

$1.55 USD

51615

36/12-Tooth Spur

Didel Module 0.3 Gears - 36/12-tooth spur, 0.69mm ID

$3.63 USD

51620

48/12-Tooth Spur

Didel Module 0.3 Gears - 48/12-tooth spur, 0.76mm bore

$5.83 USD

51630

81/12-Tooth Spur

Didel Module 0.3 Gears - 81/12-tooth spur, 0.78mm ID

$9.24 USD

51635

8mm Worm Gear

Didel Module 0.3 Gears - Worm gear, 3mm diameter, 8mm long

$6.38 USD

51600

0.61mm 9-Tooth Pinion

Didel Module 0.3 Gears - 9 Teeth pinion, 0.61mm bore (4mm short pagers)

$1.69 USD

51610

0.97mm 12-Tooth Pinion

Didel Module 0.3 Gears - 12-tooth pinion, 0.97mm bore for 1mm shaft

$1.65 USD

51650

Didel 2 Motor Minishield

Need a motor driver that can run at the lower voltages? The Didel 2 Motor Minishield can come to your rescue! Use your Arduino Uno (or form factor compatible) board with it to drive a tiny robot around.

$17.16 USD

25160

BASIC Stamp Discovery Kit (USB)

The BASIC Stamp Discovery Kit (USB) is a great way to learn the Basic Stamp.

$158.95 USD

29170

Grove - Ear-clip Heart Rate Sensor

Grove Heart Rate Sensor Ear Clip that is perfect for experimentation!

$12.90 USD

51602

0.71mm 9-Tooth Pinion

Didel Module 0.3 Gears - 9 tooth pinion, 0.71mm bore for 4mm pagers. Measures 3.55 x 3.20 x 3.20mm

$1.49 USD

51603

0.81mm 9-Tooth .Pinion

Didel Module 0.3 Gears - 9-tooth pinion, 0.81mm bore, for 6mm and several 7 mm pagers. Measures 4.47 x 3.14 x 3.14mm.

$1.49 USD

29086

Grove - I2C Touch Sensor

This advanced Grove sensor breaks out into 4 touch sensor pads for finger proximity detection.

$16.15 USD

51607

0.78mm 12-Tooth Pinion

Didel Module 0.3 Gears - 12-tooth pinion, 0.78mm bore, measures 3.50 x 4.00 x 4.00mm.

$1.40 USD

28628

DS1307 & Battery

Add-on kit, specifically for the AXE033 Serial/I2C LCD and clock module

$5.95 USD

29126

Seeed Grove - Digital Light Sensor

This module is based on the I2C light-to-digital converter TSL2561.

$9.90 USD

35194

QTI Sensor

When the QTI sensor is over a dark surface, the reflectivity is very low; when the QTI is over a light surface, the reflectivity is very high and will cause a different reading from the sensor.

$9.99 USD

29194

SeeedStudio Mixer Pack V2 Electronic blocks kit

Before inexpensive microcontrollers, logic circuits did the bulk of electronic decision-making. The Mixer Pack makes it easy to play with simple "if-then" circuits without soldering.

$52.95 USD

28635

Serial GLCD Software Pack

This optional Windows software application enables graphic images to be downloaded into the Serial GLCD (part LED042) internal EEPROM memory (for later display).

$15.00 USD

29132

Seeed Grove - LED String Light

Grove - LED String Light with voltage step up!

$14.50 USD

39148

Scribbler Robot V3

Fully programmable, Open Source, and user-hackable!

$179.00 USD

29156

Grove - BLE (dual model)

Grove - BLE (dual model) v1.0 uses CSR dual mode Bluetooth chip,with the ARM architecture single chip which supports AT instructions.

$22.50 USD

28655

PICAXE Memory Expansion Board

The PICAXE data logger is a great little solution, but sometimes you need to store just a bit more data. The PICAXE AXE111 Memory Expansion does just what you need!

$5.85 USD

50560

20 Channel EM-506 SiRF III Receiver with Antenna

This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status indicator, battery backed RAM, and a built-in patch antenna!

$39.95 USD

39250

Solarbotics Synapse-to-FTDI Adapter Kit

This board can do it all - break out the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.

$22.95 USD

25030

Solarbotics Stamp Stack II Microcontroller Kit

The HVW Technologies' Stamp Stack II is a bread-board friendly, abuse-tolerant, Parallax BS2 100% compatible microcontroller.

$35.00 USD

29098

Grove - NFC Tag

Near Field Communications Tag in a Grove module.

$21.50 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!