» Search » servo
The GWS S03N servo is a good, solid workhorse if you have a need for inexpensive reliable servos.
OpenBeam's servo bracket allows you to use just about any standard size servo with your OpenBeam or MicroRAX projects.
We had Grand-Wing Servo supply us with an inventory of their modified GWS05 servo! It's a servo without pcb - all brawn, no brains!
A simple, low-cost, high quality servo for all your mechatronic needs.
This wheel keys into most standard servo output shafts for easy wheel mounting.
Seeed Grove connectors contain 2 signal lines. Drive 2 servos with a single port with this cable
This modified servo is great for simple projects and lightweight robots.
HXT900, one of the most famous and the best value micro servos available. We have them here at Solarbotics!
The Parallax feedback 360° high speed servo is a combination of a standard servo, continuous rotation servo, high-speed servo, and encoder in a standard servo package!
Extends the reach of your servo-cable interface another 150mm.
The VS-19 Pico Linear Servo is a tiny linear actuator with 2cm of travel. The uses for this linear motor are endless, we'll leave it to you to find a killer application for it.
Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides.
Like some electronics, this linear motion Pico servo doesn't like running at over 5V. Even slightly less is better. This adapter board adds a bit of voltage drop to a 5/6V system to make your servo happy.
Looking for a good continuous-rotation servo? The Grand-Wing Servo GSV0008A is a well proven unit!
Need to move motors but don't want to use up a lot of pins? Try out the I2C enabled Motorshield from Adafruit.
It's a clever breakout board for a chip that talks I2C to drive 16 channels of PWM / Servos.
Universal connectors fit both Futaba and Hi-Tec/JR(S). Male to female. Very flexible, 12" long 22 AWG stranded wire. Black, red, white silicone rubber insulation.
Universal connectors fit both Futaba and Hi-Tec/JR(S). Male to female. Very flexible, 24" long 22 AWG stranded wire. Black, red, white silicone rubber insulation.
Universal connectors fit both Futaba and Hi-Tec/JR(S). Male to female. Very flexible, 36" long 22 AWG stranded wire. Black, red, white silicone rubber insulation.
It's an independent 16-channel, 12-bit PWM chip breakout that's ideal for driving LEDs or servos over an I2C network. Pretty handy for "Set-it & forget-it" installations.
This tiny unit from GWS comes with a ball-bearing supported shaft, Futaba connector, and accessory kit.
The Freeduino SB-Protoshield offers handy 4-switch / 4-LED / Servo / XBee prototyping space for your Arduino / Freeduino SB.
This bracket, combined with a servo, is great for mounting a variety of sensors or devices that require basic mobility.
The 1066_1 PhidgetAdvancedServo 1-Motor allows you to control the position, velocity, and acceleration of one RC servo motor.
The Secret L293D motor driver kit replaces the guts of a standard servo and turns it into tidy gear motor with a built in motor driver!
Forgot Your Password?
Don't Have an Account?Sign Up!