» Search » servo cable
This is a LONG servo-style cable, measuring 1.72M (that's 5'8", or 68"), with thicker-than-usual wire for lower line losses.
This 6ft serial cable is great for all sorts of serial programmer devices.
The Redpark Serial Cable connects iOS devices to RS-232 serial devices. It is designed for use with iPhone 4, iPhone 3GS, iPod touch (fourth generation), iPad 2 and iPad.
Connects a Lightning iPhone, iPad or iPod touch to RS-232 serial devices at baud rates up to 115.2 Kbps. Let your apps break out of the virtual world!
It's a 30cm USB A to B Cable! Yay! This little length of cable is perfect when you just don't need to use a 6 foot length.
Need a compact USB cable? This one retracts from 30" into a tight 4" long bundle!
Additional cables for the LED64.
Secure, locking, high-current 3-conductor connectors ideal for the New Stripxel WS2812b.
Extend those Pi I/O lines up to 15cm (6") away.
Connects a Lightning iPad or iPhone to RS-232 serial devices and to a 5V power source.
These 12" 6 conductor cables are wired to IDC connectors in a 2x3 array - ideal for ICSP connecting programmers to microcontrollers!
This ain't yo Mama's ribbon cable. This is Ahnold Schwarzencable - bigger, stronger, and able to rule an American state.
Cable for interfacing the EPIC Programmer to development boards LAB-X1 and LAB-X2.
Among other things, Tamiya makes this colorful multi-conductor cable that is perfect for wiring up connectors where more than 3 or 4 connections are needed.
Pre-assembled 4-conductor, 0.1" (2.54mm) pitch Molex connector to bare stripped end cable, 30cm (11.8") long. Ideal for sensor hookups!
Pre-assembled 5-way, 0.1" (2.54mm) pitch Molex connector to bare stripped end cable, 30cm (11.8") long. Ideal for sensor hookups!
Add your traditional 3-pin GVS (Ground / Voltage / Signal) device to a Grove plug
Three pin JST connector with red, black, and yellow colored wire. 5 inches of wire length, perfect for interfacing SHARP analog Infrared sensors to your project.
The PhidgetMotorControl LV is a USB based controller that can control two low-voltage brushed DC motors independently for direction, velocity and acceleration.
The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors.
The PICAXE USB programmer allows PICAXE micros to be programmed from any platform (Windows and Linux).
Parallax has added Arduino to the popular "Board of Education" system. This shield allows for convenient breadboard prototyping and servo ports with your Arduino, with no soldering required. It'll also give you easy access to Parallax's breadboard-friendly sensors and accessories.
Being so incredibly small, tidy and useful, the DSO nano has to use small non-standard jacks for the test leads. You want to connect it to standard leads? Here's the converter!
The PicBasic Pro Developers Bundle (USB) is ane ideal starting point for professional developers.
This Project board has a surface-mount BS1, power jack, DB-9 serial connection and voltage regulator. AND it comes with a breadboard, and a selection of jumper wires.
The LAB-X2 USB Hardware Bundle is the ultimate development kit for budget minded developers.
The USB to RS-232 Converter is a self powered usb to DB9 serial port adapter.
The Parallax ColorPAL is a miniature color and light sensor which uses an RGB LED to detect and generate light for color sensing.
The PicBasic Pro Ultimate Developers Bundle is a completely integrated BASIC development environment for PICmicros.
When the WheelWatcher servo encoder is added to a standard-size RC servo, it accurately senses direction, distance, velocity and acceleration.
The LAB-X3 Hardware Bundle is the ideal Low Cost starter kit for PICmicros.
The Pololu USB AVR Programmer is an extremely compact, low-cost in-system programmer (ISP) for Atmel's AVR microcontrollers.
Have a really heavy 5VDC power requirement? Will an 8A power brick with a regular barrel jack connector do the job?
Starter pack designed for the hobbyist for PICAXE experiments. 18X supplied- but supports all 8,14,20,18,28,40 PICAXE sizes. Large breadboarding area for testing and in-built input/output devices.
The PICAXE-14M IC is a tiny single-chip computer that you can program in a graphical flowchart-like language or easy to learn BASIC. This one a good upgrade from the small 08 or 08M models.
Surface mount PICAXE? You bet! All the power of the PICAXE-18X in a tiny 300mil SOIC.
The PICAXE-40X2 IC is the biggest, baddest PICAXE made - even better than the 40X1!
This adapter board is designed to make adding wireless point-to-point or mesh networking easy. Adafruit looked at all the XBee adapter boards available and decided to design something better.
The Professional Development Board is the ultimate BASIC Stamp experimenter board.
This is the low voltage version of the new PICAXE-28X2.
Here's the official Arduino Ethernet Shield With PoE Module
The 20-pin PICAXE-20M IC is an affordable mid-range microcontroller, offering eight inputs and outputs and 80 lines of memory. Save some money when you don't need the power of an "X" series chip!
PICkit 3 Development Programmer/Debugger for in-circuit serial programming or debugging PIC series microcontrollers by Microchip.
The PIR Motion Sensor is a passive infrared motion sensors that can be easily integrated into any kind of detection system.
This kit contains a 125 KHz RFID reader and additional parts.
Starter pack designed for the hobbyist for PICAXE experiments. 18X supplied, but supports all 8,14,20,18,28,40 PICAXE sizes. Complete with Serial programming cable.
This sensor uses infrared technology to detect an object at 5mm by determining the difference between low reflective conditions (i.e. black) and high reflective conditions (i.e. white).
Measures AC current up to 50Amps and DC Current from -50Amps to +50Amps, with dual outputs.
The PICAXE is a great chip, but the programming interface is a bit bizarre, using a 1/8" stereo jack. Last time we looked, breadboards didn't have stereo jacks... Good thing these adapters are available!
The 8-Pin and 14-Pin N-SOIC Adapter gives you the ability to program 8 & 14-pin N-SOIC package PICmicros.
Forgot Your Password?
Don't Have an Account?Sign Up!