» Search » servo cable
This is the Feather 32u4 Basic Proto, it has a bunch of prototyping space built right in.
This troubleshooting tool communicates between a PC and any embedded device over most standard serial protocols and a range of 0-5.5VDC. It's a tremendous help when reverse engineering, troubleshooting, observing new hardware, and/or when needing to generate a test signal.
Raspberry Pi Version1 protective case kit, in acrylic.
Feather M0 Development Board - Thin, Light, Powerful!
The MX212 - USB Driver Bay kit features everything you need to mount a 20 character x 2 line Blue USB LCD with a 24 key keypad interface, into a standard front mount PC Computer Bay.
This is a kit for a 3x3x3 cube of RGB LEDs. You can create a colour cube show with this kit, it actually look quite impressive, especially at night! You could always attach one of these suckers to your alarm clock and blast yourself awake with a multi-coloured spectacle!
For the most flexibility in assembling electronics, the PCBGrip Master Kit has a full complement of options.
The Digital Sandbox makes learning how to program microcontrollers a snap! Walk through 13 unique and interesting experiments with drag and drop programming and no soldering required.
A 3.3V Propeller-based microcontroller focused on providing an easy to use platform for educational purposes.
The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line following applications. This sensor is sold in packs of two units.
The Solarbotics Grove Education Pack is a complete bundle to teach a basic course in electronics and programming.
Easily add Class 1 Bluetooth to any of your Xbee enabled projects! This module allows your project to be up to 20 meters away.
This kit from Evil Mad Science works like an indoor sundial, but with three shadows of different length. Save some money with this version, which doesn't include the acrylic case.
This kit from Evil Mad Science works like an indoor sundial, but with three shadows of different length. This version comes with your choice of laser-cut Acrylic case.
The Thymio 2 is a fully-functional robot out-of-the-box, with an excellent pedigree.
PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C
These are strands of smart RGB LEDs pixels, that have been used to create huge outdoor signs & displays. Instead of having a chain of thousands we've got some in smaller 20 piece strands for your projects and applications!
The Thymio 2 is a fully-functional robot out-of-the-box, with an excellent pedigree. This wireless version offers some excellent live features not available in the stock version.
Want individually-controlled, color changing LED pixels that can be securely mounted in your application and have enough waterproofing to survive outdoors? The 20 strand RGB LED Stringxels are here to save the day!
The Arduino Mega 2560 is the open-source "big brother" to Duemilanove/Uno reference design, using the much more capable ATmega2560.
The Arduino Uno is the all-new replacement for the favourite and popular Arduino Duemilanove. Now shipping R3!
Looking to build the smallest, handiest, bread-board friendly Arduino-compatible? The Ardweeny fits on the back of the included ATmega328P, taking up no more valuable breadboard space than the microcontroller itself!
The 28-pin project board is fully-assembled development board which has been designed to allow rapid prototyping with the 28-pin PICAXE microcontrollers.
This humidity/temperature sensor measures relative humidity from 10% to 95% with a typical error of ±2% RH at 55% RH
A fully assembled surface mount Arduino-compatible.
Why use cut telephone wires when you can use these great male-to-male 100mm jumper wires?
USB type-B connectors are the big ugly square ones. Easy to find cables for, but they sure ain't very pretty. So they still have value. Get them here at Solarbotics!
The Phidget Mini-Dual Axis Joystick is a dual axis mini joystick with momentary contact switch.
Acrylic Enclosure for Phidget Interface Kit (#3802)
The 3804 Enclosure is designed to protect the PhidgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure.
The Raspberry Pi S.A.F.E. is a useful, simple acrylic enclosure kit designed for your Pi V3.
The Phidget Slider 60 Sensor is a 60mm slide sensor that works with the Phidgets 8/8/8.
Connect your Wii Nunchuck to your Grove based project!
This is the XBee Explorer Dongle unit for the XBee line.
2 in 1 HDMI Female to Mini Micro HDMI Male V1.4 90 Degree Converter Adapter
This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. It's a Dual MC33926 motor driver which operate from 5 to 28 V and can deliver a continuous 3A per motor. The board also features breakout headers for pin-remapping and standard 0.1" spacing.
The Pi SAFE VESA mount is a convenient way to attach your Pi to the back of your monitor or TV.
A WIDE VESA mount for attaching your Raspberry Pi SAFE enclosure to the back of your monitor or TV.
The Raspberry Pi SAFE acrylic kit is an inexpensive and attractive way to protect your B+ / V2
GrovePi+ is a system with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi.
Learn how to add Speech recognition to your home automation with this slick kit..
This is a breakout combo for the LSM6DS33 3-axis gyro/3-axis accelerometer and an LIS3MDL 3-axis magnetometer. With this board, you get a full 9 degrees of freedom!
Need servo wires to attach to your sensors? We've got the 3-conductor cable with female header ready to go!
This is a LONG servo-style cable, measuring 1.72M (that's 5'8", or 68"), with thicker-than-usual wire for lower line losses.
This 6ft serial cable is great for all sorts of serial programmer devices.
The Redpark Serial Cable connects iOS devices to RS-232 serial devices. It is designed for use with iPhone 4, iPhone 3GS, iPod touch (fourth generation), iPad 2 and iPad.
Connects a Lightning iPhone, iPad or iPod touch to RS-232 serial devices at baud rates up to 115.2 Kbps. Let your apps break out of the virtual world!
It's a 30cm USB A to B Cable! Yay! This little length of cable is perfect when you just don't need to use a 6 foot length.
Need a compact USB cable? This one retracts from 30" into a tight 4" long bundle!
Additional cables for the LED64.
Secure, locking, high-current 3-conductor connectors ideal for the New Stripxel WS2812b.
Extend those Pi I/O lines up to 15cm (6") away.
Connects a Lightning iPad or iPhone to RS-232 serial devices and to a 5V power source.
These 12" 6 conductor cables are wired to IDC connectors in a 2x3 array - ideal for ICSP connecting programmers to microcontrollers!
This ain't yo Mama's ribbon cable. This is Ahnold Schwarzencable - bigger, stronger, and able to rule an American state.
Cable for interfacing the EPIC Programmer to development boards LAB-X1 and LAB-X2.
Among other things, Tamiya makes this colorful multi-conductor cable that is perfect for wiring up connectors where more than 3 or 4 connections are needed.
Pre-assembled 4-conductor, 0.1" (2.54mm) pitch Molex connector to bare stripped end cable, 30cm (11.8") long. Ideal for sensor hookups!
Pre-assembled 5-way, 0.1" (2.54mm) pitch Molex connector to bare stripped end cable, 30cm (11.8") long. Ideal for sensor hookups!
Add your traditional 3-pin GVS (Ground / Voltage / Signal) device to a Grove plug
Three pin JST connector with red, black, and yellow colored wire. 5 inches of wire length, perfect for interfacing SHARP analog Infrared sensors to your project.
The PhidgetMotorControl LV is a USB based controller that can control two low-voltage brushed DC motors independently for direction, velocity and acceleration.
The PICAXE USB programmer allows PICAXE micros to be programmed from any platform (Windows and Linux).
The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors.
Being so incredibly small, tidy and useful, the DSO nano has to use small non-standard jacks for the test leads. You want to connect it to standard leads? Here's the converter!
The PicBasic Pro Developers Bundle (USB) is ane ideal starting point for professional developers.
This Project board has a surface-mount BS1, power jack, DB-9 serial connection and voltage regulator. AND it comes with a breadboard, and a selection of jumper wires.
The LAB-X2 USB Hardware Bundle is the ultimate development kit for budget minded developers.
The USB to RS-232 Converter is a self powered usb to DB9 serial port adapter.
The PicBasic Pro Ultimate Developers Bundle is a completely integrated BASIC development environment for PICmicros.
When the WheelWatcher servo encoder is added to a standard-size RC servo, it accurately senses direction, distance, velocity and acceleration.
The LAB-X3 Hardware Bundle is the ideal Low Cost starter kit for PICmicros.
The Pololu USB AVR Programmer is an extremely compact, low-cost in-system programmer (ISP) for Atmel's AVR microcontrollers.
Have a really heavy 5VDC power requirement? Will an 8A power brick with a regular barrel jack connector do the job?
Starter pack designed for the hobbyist for PICAXE experiments. 18X supplied- but supports all 8,14,20,18,28,40 PICAXE sizes. Large breadboarding area for testing and in-built input/output devices.
The PICAXE-14M IC is a tiny single-chip computer that you can program in a graphical flowchart-like language or easy to learn BASIC. This one a good upgrade from the small 08 or 08M models.
Surface mount PICAXE? You bet! All the power of the PICAXE-18X in a tiny 300mil SOIC.
This adapter board is designed to make adding wireless point-to-point or mesh networking easy. Adafruit looked at all the XBee adapter boards available and decided to design something better.
The PICAXE-40X2 IC is the biggest, baddest PICAXE made - even better than the 40X1!
The Professional Development Board is the ultimate BASIC Stamp experimenter board.
This is the low voltage version of the new PICAXE-28X2.
Here's the official Arduino Ethernet Shield With PoE Module
The 20-pin PICAXE-20M IC is an affordable mid-range microcontroller, offering eight inputs and outputs and 80 lines of memory. Save some money when you don't need the power of an "X" series chip!
PICkit 3 Development Programmer/Debugger for in-circuit serial programming or debugging PIC series microcontrollers by Microchip.
The PIR Motion Sensor is a passive infrared motion sensors that can be easily integrated into any kind of detection system.
This kit contains a 125 KHz RFID reader and additional parts.
Starter pack designed for the hobbyist for PICAXE experiments. 18X supplied, but supports all 8,14,20,18,28,40 PICAXE sizes. Complete with Serial programming cable.
This sensor uses infrared technology to detect an object at 5mm by determining the difference between low reflective conditions (i.e. black) and high reflective conditions (i.e. white).
Measures AC current up to 50Amps and DC Current from -50Amps to +50Amps, with dual outputs.
The PICAXE is a great chip, but the programming interface is a bit bizarre, using a 1/8" stereo jack. Last time we looked, breadboards didn't have stereo jacks... Good thing these adapters are available!
Want a tidy AVR-ISP compatible programmer that also acts as a USB to TTL converter? Pololu's Orangutan USB AVR programmer fits the bill!
The PICAXE-08M IC is a tiny single-chip computer that you can program in a graphical flowchart-like language or easy to learn BASIC. With twice the RAM of the PICAXE-08, and with interrupts!
The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller.
The PICAXE-28X2 builds on top of the X1, improving on the already impressive specs and adding more features.
The Prop Clip snaps to the edge of Propeller processor sticks for easy usb-to-serial programming!
The PMB-688 GPS module provides high performance with a SiRFstarIII chipset and integrated patch antenna.
The Precision Light Sensor measures human perceptible light level in lux.
The Prop Plug is a compact USB to Serial connector for microcontroller programming and communication. We're about the best place in the universe to get them!
The jrk 12v12 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC).
The PICAXE-18X IC is a tiny single-chip computer that you can program in a graphical flowchart-like language or easy to learn BASIC. Limited stock remaining at 20% off!
Forgot Your Password?
Don't Have an Account?Sign Up!