We've received word that we will be receiving new stock on all our push pogo pins, but they will not be available for order until October 8 or 9th. The order link will be restored when the inventory arrives.
Propellor, Maker Faire
Dave Hrynkiw
May 8, 2009
Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the past few years we're once again gearing up to make the trip to sunny San Fransisco to show off all our wares. If you're in the Bay area, swing by to say hello. You'll also find a BUNCH of cool stuff at the faire - there's no possible way to explain all the awesome things we've seen at past shows. But until the 30th and 31st roll around, we're in gung-ho mode while we prepare. Fair warning (Bahaha! Awesome pun!) - Solarbotics and HVW Tech will be closed from May 29th to June 1st, so you may want to plan ahead if you foresee an urgent order in your near future. We'll have more details regarding being closed as we get closer to the date.
But what if you're not going to be at Maker Faire? What if you just want more cool stuff instead? Don't worry, we have you covered with a brand spankin' new 2.55" Propellor from GWS. Check out that stats on this bad boy:
- 63mm (2.5") long
- 19mm (0.75") pitch (how much it theoretically moves forward in a single full revolution)
- 1mm shaft hole diameter (easily drilled out to suit your motor)
It's online and ready for purchase, you know the drill. And that about wraps it up - have a great weekend everyone!
MORE POSTS
Wednesday Cool Links
If I could choose a super power, I would pick the ability to erase people's memory. And lucky for me, I've just been granted a free wish from The Magic Taco. Get ready, everyone. Pew! Done! Whew, now we never have to write a new post again. Check out these "new" links we prepared for […]
Heat sinks, Screwdrivers and the Lessons...
You would think in these days it would be a simple task to source something you want to have made. After all, MAKE, the Internet and the world "getting smaller" would have you think that it'd be an easy task. Sometime it is, and sometimes it's like this! We've been to Hong Kong and China […]
Vancouver BEAM Workshop
Here's a few links to a workshop spear-headed by ScottyDogma in Vancouver, B.C. Some impressive work done using servos, BIOBug motors, some wooden spacer blocks and lots of soldering! Nice job, guys. Pics and movies: http://www3.telus.net/dogmabots Full Size (1344 x 1008, 500-700K) http://www.davehylands.com/VRC-BEAM-Workshop/index.html Half-Size (672 x 504, 100-150K) http://www.davehylands.com/VRC-BEAM-Workshop/Thumb-B/index.html
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.