Regular Motor 3 - 6V
RM3
2.00
USD
Qty
Price
1
$2.00 ea.
2+
$1.75 ea.
25+
$1.69 ea.
100+
$1.49 ea.
This is the standard motor that is built into the GM2/3/8/9. Nominally runs at 6VDC and consumes roughly 35mA
Description [Hide]
This is the standard motor that is built into the GM2/3/8/9. It nominally runs at 6VDC and consumes roughly 35mA.
If you've blown up your GMx motor, you're in luck! This would be the replacement you're looking for!
Now includes a plastic pinion gear that fits onto the output shaft!
You Might Also Like [Hide]
RM2
Regular Motor 2
Need more power out of your gear motor? This is a high-power motor that fits in the same form factor as used by the GM2/3/8/9 style gear motors.
$2.25 USD
RM1A
Standard Motor
This "030" form factor motor replaces the old Mabuchi FF-030 we used to stock, and is still a good candidate for torquey Solarengine and small battery-powered robots.
$2.95 USD
GM2
Gear Motor 2 - 224:1 Offset Shaft
This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!
$5.75 USD
GM9
Gear Motor 9 - 143:1 90 Degree Shaft
This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!
$5.75 USD
13104-NC
Bulbdial Clock Kit (No Case)
This kit from Evil Mad Science works like an indoor sundial, but with three shadows of different length. Save some money with this version, which doesn't include the acrylic case.
$64.95 USD
51003
Pololu Jrk 21v3 USB Motor Controller w/ Feedback
The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC).
$49.95 USD
22305
28BYJ-48-16 16:1 Stepper Gearmotor
Originally designed for control of HVAC vanes and similar low-demand equipment, these stepper-motor gearboxes have lots of hacking potential. This is the lower torque / higher speed 16:1.
$4.50 USD
50402
Serial Embedded LCD Backpack
The serial enabled LCD backpack allows you to control a parallel based LCD over a single-wire serial interface.
$16.95 USD
18690
AL162A-R Serial LCD Module
All MOS units can be directly connected to a microcontroller such as a PIC, BASIC Stamp, OOPic or PICAXE using the TTL interface.
$26.22 USD
31050
Ethernet-SPI/Bus Module
Add ethernet connectivity to your project with the Wiznet WIZ811MJ module. Ready to go on a convenient board!
$24.95 USD
Currency
Login
Privacy Policy Return Policies Terms Of Use
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.
© 1995-2018 Solarbotics Ltd.