» Components » Resistors
5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.
The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DCE means it's configured as a "Data Communications Equipment" (with 9 holes).
The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors.
Marble Motion kit, enabled by Solarengine technology that keeps on moving even in low indoor light!
Simple 2x20 ribbon cable that breaks out the GPIO pins from the Raspberry Pi
Sometimes...you just need pins. Lots of pins. Not sure how long, but lots. So here's a strip of 36 that's a convenient size to 'snik' apart to whatever length you need!
Give your project a voice, and more than just pre-recorded messages on loop! The EMIC 2 takes a serial string and turns it into synthesized voice.
This is the Arduino shield version of our TLC5940 Breakout. The PWM Shield will allow you to generate up to 16 PWM signals from your Arduino by utilizing the power of the TLC5940 IC.
Forgot Your Password?
Don't Have an Account?Sign Up!