Push Pogo Probe Holder
pph2
1.25
USD
Qty
Price
1
$1.25 ea.
2+
$0.99 ea.
25+
$0.89 ea.
100+
$0.79 ea.
Pogo-Pin probe holders for 1.01mm diameter pins
Description [Hide]
This holder is specially designed for easy installation/replacement of the 1.01mm OD Pogo Pins.
This holder installed into 1.31mm (0.052") holes to facilitate the easy mounting and replacement of PP1, PP3, PP4, PP6 & PP8 pogo pins.
Ideal if you're actually using these pins for what they're designed for, and not robot appendages! Pogo pins press fit into this holder, you may have to give them a little extra push to get them to the bottom of the holder but once they are seated they stay in place quite nicely.
You Might Also Like [Hide]
52260
Pogo Pin Probe Clip
This spring-loaded pogo pin clip gives you the flexibility to measure your signals without tying up one of your precious finger support systems.
$2.95 USD
PP1
Push Pogo Pin 1 - Masher
This 33mm (1.3") long masher-tipped pogo/probe ping is normally used for electronic JTAG uses, but we use them for bots!
$1.25 USD
PP2-75
75-Series Push Pogo Pin - 4 Point
This medium 17mm long 4-sided point tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!
$1.25 USD
PP2-50
50-Series Push Pogo Pin - 4-Sided Point
This smaller, 16.4mm long cone-tipped pogo/probe ping is normally used for electronic JTAG uses, but we use them for bots!
$1.50 USD
PP12-100
Push Pogo Pin - Cone Tip
This 33mm (1.3") long cone tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!
$1.25 USD
PPH-40
Push Pogo Probe Holder - Style 40 size
This is the holder for our now discontinued PP8S short pogo pins.
$1.50 USD
K PP
Solarbotics Photopopper Photovore V5.0
This new version of the Photopopper is still a solar-powered, light-seeking, obstacle-avoiding robot, but now with updated electronics & gold trim that make it twice as fast!
$35.95 USD
#4-40x0.25hex0.25mf-son
4-40 x 1/4 hex, 1/4 tall male female standoff Nylon
It's a 1/4" tall, male/female nylon standoff, threaded for #4-40
$0.35 USD
52716
Stepper Motor with ZT-ASY-00101 Wiring Harness
This Nema 17 Stepper motor offers substantial holding torque at a low 2.8VDC. It's the same model as used in the Openbeam Kossel 3D printer.
$19.00 USD