50-Series Push Pogo Pin - 4-Sided Point

PP2-50

1.50 USD
Qty
Price
1
$1.50 ea.
2+
$1.25 ea.
25+
$1.19 ea.
100+
$1.10 ea.

This smaller, 16.4mm long cone-tipped pogo/probe ping is normally used for electronic JTAG uses, but we use them for bots!


Description [Hide]

This pin is great for use with tiny robots or for programming chips from the tiniest of pads.The PP2-50 is perfect for use with the PPH-50 pogo pin holder for quick and easy replacement.

Features

  • Head type:4-sided point
  • Dimensions: 16.4 x 0.68 x 0.68mm
  • Recommended min-center: 1.27mm
  • Spring force: 80gms
  • Current rating: 3A
  • Contact resistance: 50milliohms
  • Full travel: 2.5mm
  • Mounting hole size: 0.91-0.95mm

You Might Also Like [Hide]

PPH-50

50-Series Push Pogo Probe Holder

This little devices allow you to simply and easily install and replace existing 50-series pogo pins

$1.50 USD

PP1

Push Pogo Pin 1 - Masher

This 33mm (1.3") long masher-tipped pogo/probe ping is normally used for electronic JTAG uses, but we use them for bots!

$1.25 USD

PP3

Push Pogo Pin 3 - Chisel Point

This 33mm (1.3") long poker-tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!

$1.25 USD

PPH1

Push Pogo Probe Holder

This holder is specially designed for easy installation/replacement of the PP1/3/4/6/8 Pogo Pins

$1.25 USD

pph2

Push Pogo Probe Holder

Pogo-Pin probe holders for 1.01mm diameter pins

$1.25 USD

14062

5V 2-Pin 50mm 50x50x10mm Brushless DC Cooling Fan

Need extra cooling for your embedded project? This is the ticket!

$4.99 USD

FPin5LP

Female Low Profile Socket Strip - 5 per

Female Low profile socket strip - 5 per Strip, 0.100" (2.54mm) spacing

$0.45 USD

52627

OpenBeam T Joining Plate, Anodized Aluminum - 2 Pack

T-shaped joining plates for all your OpenBeam creations!

$5.20 USD

R1.2M

1.2M Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

51015

Pololu Dual MC33926 Motor Driver Shield

This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. It's a Dual MC33926 motor driver which operate from 5 to 28 V and can deliver a continuous 3A per motor. The board also features breakout headers for pin-remapping and standard 0.1" spacing.

$34.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!