Solarbotics Sumovore Baseplate Upgrade

K SV-UPG1

6.95 USD
Qty
Price
1
$6.95 ea.

For owners of Sumovores purchased prior to May 2005, this kit solidifies your Sumovore with a powder-coated steel baseplate!


Description [Hide]

Our initial release of the Sumovore revealed that our motor & battery pack mounting solution wasn't as robust as it should have been. Our solution was to engineer a steel plate that makes your Sumovore motor and battery pack mounting much more secure.

Besides increasing the stiffness of the chassis, it also increases the mass for better traction!

Just to reiterate: You DO NOT need this if you are ordering a Sumovore now. It is only useful retrofitting zip tie versions.

Documentation [Hide]

You Might Also Like [Hide]

GMPW

GM Series Plastic Wheels

2-5/8" diameter wheels for the GM2/3/8/9 gear motor.

$3.25 USD

K SV-BS2

Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD

SVFP

Sumovore Front Plate

Battle damaged your front plate? Need a new look? Check out these colors!

$5.00 USD

GM8

Gear Motor 8 - 143:1 Offset Shaft

This 143:1 gear motor is much like the GM2 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!

$5.75 USD

30010

RS-232 Driver Module - DTE Version

The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DTE means it's configured as a "Data Terminal Equipment" (with 9 pins).

$11.95 USD

30000

RS-232 Driver Module - DCE

The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DCE means it's configured as a "Data Communications Equipment" (with 9 holes).

$11.95 USD

60100

Solarbotics Arduino Freeduino Enclosure (SAFE)

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.

$9.95 USD

K TB

Solarbotics Turbot Tumbling Robot

The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!

$59.95 USD

33150

PhidgetRFID Kit

This kit contains a 125 KHz RFID reader and additional parts.

$75.00 USD

21370

Super Carrier Board

The Super Carrier Board is great for both the BASIC Stamp 1 and BASIC Stamp 2 Modules.

$19.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!