Gold Anodized Aluminum 14x14x6mm Heat Sink with Adhesive

HS14x14x6G

1.00 USD
Qty
Price
1
$1.00 ea.

Use these peel-and-stick heat sinks to remove heat from sensitive ICs. Perfect for Raspberry Pi processors!


Description [Hide]

These little guys remove heat by adding more surface area for cooling. These are perfect for small motor controllers, Raspberry Pi's, SoC's, or any other surface mount chip that runs a bit hot!

Specifications:

  • Material: Aluminium
  • Dimensions: 14x14x6mm
  • Color: Gold
  • Adhesive back
  • Fins: 7
  • Fin Length: 4.25mm
  • Fin Width: 0.75mm
  • Thermal tape included

You Might Also Like [Hide]

K SV-UPG1

Solarbotics Sumovore Baseplate Upgrade

For owners of Sumovores purchased prior to May 2005, this kit solidifies your Sumovore with a powder-coated steel baseplate!

$6.95 USD

m1.6x4-p

Metric M1.6mm x 4mm screw, Pan-head Package of 10

Metric M1.6 x 4mm long screw, 0.35mm pitch, Phillips pan-head, 10-lot

$4.00 USD

Prop2508

2.55" Propeller

Looking for a small, well-made propeller for your projects? GWS makes a great series of propellers, and the EP2508 is a nice size for a pager motor!

$0.95 USD

51510

Didel GM17 Encoder

Here's a really cool quadrature encoder and motor driver for the GM17 Gear motor designed by the micro-specialists at Didel.

$11.95 USD

39291

Getting Started with Synapse Bundle

A great introduction to starting out with Radio Frequency (RF) Networking. Use your computer to control a remote application or have the application control the computer. This bundle + guide will get you up and running with RF networking in a practical way.

$76.93 USD

18670

AL162A-BW Serial LCD Display

All MOS units can be directly connected to a microcontroller such as a PIC, BASIC Stamp, OOPic or PICAXE using the TTL interface.

$34.95 USD

K SV-BS2

Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD

90110

"On the GO" Electronics Tool Bundle

For a good basic set of electronics-building tools for when you're on-the-go, here's what we recommend. Hakko-to-go!

$59.23 USD

51007

Pololu 38 kHz IR Proximity Sensor, Fixed Gain,Low Brightness

Solid, accurate way of determining if something with within range!

$5.95 USD

52070

Teensy USB Board, Version 3.5 without Pins

PJRC did it again! Arduino compatible, 32bit, 120MHz ARM Cortex M4, and 5V tolerant to boot!

$24.25 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!