GM3/GM9 Gear Motor Bracket, Laser-Cut Steel
GMB39
1.50
USD
Qty
Price
1
$1.50 ea.
2+
$1.35 ea.
20+
$1.25 ea.
The GM3/GM9 gear motors have convenient holes for mounting, but these precision stamped steel brackets add to their versatility!
Description [Hide]
The provided mounting holes in the GM3/GM9 gear motors are a convenient way to mount these to your project, but sometimes you just need a different way to mount them. These precision stamped steel brackets match the features on the gear motor, and securely clamp them down to your project.
Use any #4-sized screw or nut/bolt for assembly, but we use special #4x1/2" screw designed for threading plastic to mount these to our chassis. This screw also does a great job going into the steel bracket!
Documentation [Hide]
- [Data Sheet]: Mechanical Drawing
You Might Also Like [Hide]
GM3
Gear Motor 3 - 224:1 90 Degree Shaft
This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!
$5.75 USD
GMW
GM2/3/8/9/17 Gear Motor mounts
Auxiliary mounts for the GM2/3/8/9/17 gear motors. Image shows each side of wheel (not sold in sets of 2)
$1.25 USD
GMPW Deal
GM2/3/8/9/17 with GMPW
Need a gear motor and wheel? Get this convenient package, and save! Complete with a GM2/3/8/9/17 gear motor, a wheel with a molded-on tire, and mounting screw.
$7.98 USD
GM9
Gear Motor 9 - 143:1 90 Degree Shaft
This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!
$5.75 USD
K SV-PIC
Solarbotics Sumovore PIC Brainboard V2.0
Using one of the most popular styles of microcontrollers, this brainboard add-on replaces the standard discrete-logic brain with an established, powerful microcontroller! For use on select products.
$25.95 USD
K SV-Atmel
Solarbotics Sumovore Atmel Brainboard V2.0
This Sumovore add-on brainboard replaces the standard discrete logic brain with a powerful, programmable microcontroller! (Requires host product)
$20.95 USD
K SV-BS2
Solarbotics Sumovore BS2 Brainboard
This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.
$15.95 USD
K TB
Solarbotics Turbot Tumbling Robot
The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!
$59.95 USD
14435
GT2 Aluminum Timing Idler with bearings - no teeth
Idler bearing (no teeth), matches 20 tooth pulley diameter.
$2.88 USD
52066
Prop Shield With Motion Sensors
The Teensy Prop Shield is a wonderfully full-features sensor add-on for Teensy (and other) microcontrollers, featuring 11 sensor inputs, audio amplification and 8MB extra memory.
$21.00 USD