GM4 Limited-Rotation Output Gear
GM4-LG
0.50
USD
Qty
Price
1
$0.50 ea.
This output gear changes the GM4 from continuous rotation to limited rotation.
Description [Hide]
The GM4 has continuous-rotation output, but sometimes you need to have a rotation limit, like with a regular servo. This output gear replaces the stock GM4 output gear, returning the GM4 to 210 degree rotation.
You Might Also Like [Hide]
GM4
Gear Motor 4 - Clear Servo
We had Grand-Wing Servo supply us with an inventory of their modified GWS05 servo! It's a servo without pcb - all brawn, no brains!
$12.00 USD
GM9
Gear Motor 9 - 143:1 90 Degree Shaft
This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!
$5.75 USD
51500
51:1 and 104:1 Rome Gears for GM17
This package includes two sets of gears so that you can modify your GM17 to a 51:1 or 104:1 ratio.
$4.40 USD
GM2
Gear Motor 2 - 224:1 Offset Shaft
This 224:1 gear motor is very comparable to a hobby servo for power, at a fraction of the cost!
$5.75 USD
30010
RS-232 Driver Module - DTE Version
The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DTE means it's configured as a "Data Terminal Equipment" (with 9 pins).
$11.95 USD
30000
RS-232 Driver Module - DCE
The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DCE means it's configured as a "Data Communications Equipment" (with 9 holes).
$11.95 USD
60100
Solarbotics Arduino Freeduino Enclosure (SAFE)
The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.
$9.95 USD
K TB
Solarbotics Turbot Tumbling Robot
The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!
$59.95 USD
14435
GT2 Aluminum Timing Idler with bearings - no teeth
Idler bearing (no teeth), matches 20 tooth pulley diameter.
$2.88 USD
M1.7x4mm-PCSS
M1.7x4mm 304 Stainless Steel Cross countersunk head Machine Screw
M1.7x4mm 304 Stainless Steel Philips head countersunk machine screws, qty 10
$1.50 USD