Gear Motor 24 - 1:192 90 Degree Shaft

GM24

4.25 USD
Qty
Price
1
$4.25 ea.

Call it a teeny, tiny little brother to the GM3 gearbox. With a suitably smaller appetite for power!


Description [Hide]

Borrowing the form factor of our popular GM3 gearbox, the GM24 is a pager-motor powered relative that is great for tight spaced applications.Make a robot so small that it can fit inside another robot!

Specifications

  • Gear Ratio: 1:192
  • Operating Voltage: 3.0V
  • Current Draw (no load): 30~80mA
  • RPM (no load): 100~410 rpm
  • Output Torque: 60~480 gf*cm
  • Weight: 3.6g

And we always like to take a physical sampling to see exactly how good they test in-house. Here's our results:



Dimension displayed above in the third product picture.

You Might Also Like [Hide]

GM23

Gear Motor 23 - 1:192 Offset Shaft

This 1:192 Tiny Geared Pager Motor has an offset shaft much like the GM2, but is roughly half the size in every dimension. We suspect that these were the motors used for the Magic school bus in it's miniature state.

$5.00 USD

GM7

Gear Motor 7 - 120:1 "Baby GM3"

The GM7 is a baby version of our popular right-angle drive GM3 gear motor.

$5.75 USD

GM25

120:1 Micro Pager Planetary Gearmotor

This is the tiniest gearmotor we've seen that's humanly affordable. What can you do with it? Ummm...

$14.50 USD

GM15A

Gear Motor

You know and love the GM15, but hate the pulley-shaft? Ok, ok - here's a more standard "D" shaft configuration!

$19.00 USD

K SV-BS2

Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD

K SV

Solarbotics Sumovore Mini-Sumo

The Solarbotics Sumovore Kit is a strong, modular design with over 500 man-hours of development and 21 prototypes behind it. It has more power, speed, and is less expensive than the Junun Mark III, Parallax Mini-Sumo, and Tab SumoBot.

$98.50 USD

60100

Solarbotics Arduino Freeduino Enclosure (SAFE)

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.

$9.95 USD

K TB

Solarbotics Turbot Tumbling Robot

The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!

$59.95 USD

#4-40x1/4PHMS-Nylon

#4-40 x 1/4" Combination Head Nylon Screw, 10 lot

10 x Nylon 4-40 x 1/4" combination head screw

$2.00 USD

PP2-50

50-Series Push Pogo Pin - 4-Sided Point

This smaller, 16.4mm long cone-tipped pogo/probe ping is normally used for electronic JTAG uses, but we use them for bots!

$1.50 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!