Gear Motor 2 - 224:1 Offset Shaft

GM2

5.75 USD
Qty
Price
1
$5.75 ea.
20+
$5.25 ea.
50+
$4.95 ea.
100+
$4.80 ea.

This 224:1 gearmotor is very comparable to a hobby servo for power, at a fraction of the cost!


Description [Hide]

Solarbotics is the sole commercial outlet for these impressive 224:1 gearmotors. They are very comparable to a hobby servo for power, at a fraction of the cost!

Mechanical Features

  • 7mm output shaft with double-flat outputs
  • Secondary output shaft (D) for encoders (not meant for rotational loads)
  • Built-in safety ratchet clutch set for 60 in*oz torque (easily modified for full "locked-up" operation)
  • Built in mounting holes
  • 55x48x22.7mm (2.17x1.89x0.894")
  • 31.4 grams (1.11oz)
  • 3-6VDC nominal operation

3V Features

  • 24RPM
  • 48.6 in*oz torque
  • 40mA free-running current
  • 400mA stall current

Based on the original design by Mark Tilden for use in the B.I.O.Bugs & RoboSapien, these motors are the next generation with a variety of improvements such as dual output shafts and a lower current motor.

Check out this quick tutorial for how to modify the GM2 from a torquey slow 224:1 ratio to a speedy 14:1 ratio.

Do you need to mount something to the shaft of the motor? Try the GMW - it's a very effective platform for a variety uses. Alternatively, you'll also find that a #2x1/4" SMS screw will provide a snug fit for your need.

(Motors are sold individually, wheels are not included)

Documentation [Hide]

You Might Also Like [Hide]

GMW

GM2/3/8/9/17 Gear Motor mounts

Auxiliary mounts for the GM2/3/8/9/17 gear motors. Image shows each side of wheel (not sold in sets of 2)

$1.25 USD

GMB28

GM2/GM8 Gear Motor Bracket, Laser-Cut Steel

The GM2/GM8 gear motors have convenient holes for mounting, but these precision stamped-steel brackets add to their versatility!

$1.50 USD

SWT9

SPDT Snap Lever Switch

This SPDT snap lever switch is modifiable into tactile sensors.

$1.75 USD

BHoldAA 4 Cell

4 x AA Battery Holder

It's a nice quad-AA battery holder, with 6" leads.

$2.75 USD

K SV-Atmel

Solarbotics Sumovore Atmel Brainboard V2.0

This Sumovore add-on brainboard replaces the standard discrete logic brain with a powerful, programmable microcontroller! (Requires host product)

$20.95 USD

K SV-BS2

Solarbotics Sumovore BS2 Brainboard

This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.

$15.95 USD

60100

Solarbotics Arduino Freeduino Enclosure (SAFE)

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.

$9.95 USD

K TB

Solarbotics Turbot Tumbling Robot

The Turbot is the Velociraptor of the Robot Jurassic Park! Full body tumbling gets this aggressive robot over all sorts of terrain on its search for light!

$59.95 USD

11330

Engineer's Mini Notebook (VOL IV)

Volume IV of the Forest Mims Engineers Mini Notebook series includes four of his best-selling Mini Notebooks

$12.95 USD

17422

On-the-go Micro USB connector

Cool tiny USB OTG Adapter!

$2.99 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!