And what makes it easy to stack shields? These do! Our FPin10L. Catchy name, right? It's a female socket strip, 10 positions long, with a Long modification of 0.0413" tail. See?

In short, you solder these in where the standard Arduino Shield's interfacing pins would go, but now you also have a matching set of female sockets on top! Use them for stacking more shields, or just as convenient test-measurement points for your probes.

Documentation ^[Hide]

[Schematic]: Mechanical Drawnig - Feb 2010

You Might Also Like ^[Hide]

FPin8L-413

8-Pin Shield Stacking Header

Want to stack more than one shield at a time? Use these instead of standard 6-pin headers to add extra functionality to your shield!

$0.45 USD

FPin6L-413

6-Pin Shield Stacking Header

Want to stack more than one shield at a time? Use these instead of standard 6-pin headers to add extra functionality to your shield!

$0.45 USD

18911

Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit

Need to move motors but don't want to use up a lot of pins? Try out the I2C enabled Motorshield from Adafruit.

$19.95 USD

50450

Arduino USB Board (Uno R3)

The Arduino Uno is the all-new replacement for the favourite and popular Arduino Duemilanove. Now shipping R3!

$29.45 USD

Mpin3xL

Male Strip Pins - 3 per, 23.5mm long

This double-sided triple LONG pin is particularly handy for splicing two servo cables together, or turning a female servo cable into a male.

$0.69 USD

hvjst3

3-pin JST-ZH Connector (1.5 mm Pitch)

The JST-ZH 3-pin connector is another common electronics interconnect standard.

$0.50 USD

HVJST2

2-pin JST-PH Connector (2.0 mm Pitch)

The 2-pin, 2mm pitch JST connector is often seen on Lithium Polymer (LiPoly) batteries. Use this when you need the board (male) connector, or need to mate to the female connector.

$0.65 USD

45075

Sharp Sensor Cable, 20cm

You'll save tons of time and won't need the soldering iron for these Sharp infrared sensor cables! These cables allow you to easily interface Sharp infrared sensors to your robotics project without the need for soldering.

$1.95 USD

23226

MinIMU-9 V5 - IMU Digital Combo Board - 9 Degrees of Freedom

This is a breakout combo for the LSM6DS33 3-axis gyro/3-axis accelerometer and an LIS3MDL 3-axis magnetometer. With this board, you get a full 9 degrees of freedom!

$16.91 USD

15017

3-conductor, 22AWG ribbon cable, 1M

3 x 22AWG multistrand conductors in a pretty multicolor ribbon

$1.90 USD

10-pin Shield Stacking Header

FPin10L-413

Description ^[Hide]

Documentation ^[Hide]