3.6V / 280mA Triangular Rechargeable Battery


This Product Has Been Discontinued, This Page Is For Reference Only.

0.50 USD
$0.50 ea.
$0.38 ea.

This 3.6V 280mAh rechargeable Ni-Cad battery contains three cells in a right triangle configuration.

Description [Hide]

This 3.6V 280mAh rechargeable Ni-Cad battery contains three cells in a right triangle configuration. It measures up with a 5cm base x 1.9cm tall (2" base x 3/4" inch tall).

We just found a box full of these batteries, but with tabs instead of wire leads. This is surplus stock - so get it while it lasts.


You Might Also Like [Hide]


6-Gate Inverter

This Hex inverter chip with Schmidt trigger inputs is often used for Microcore-style circuits.

$0.75 USD


Octal Inverting Buffer

The 74AC240 is an octal (8-channel) inverter buffer chip, or better known as The Bicore IC.

$1.00 USD


Polymer Lithium Ion Battery - 1000mAh 7.4v

This high discharge 2-cell LiPo is a great way to power any R/C, robotic, or portable project. This is an excellent choice for anything that requires a small battery with a lot of punch.

$9.95 USD


CR2032 3V Lithium Coincell Battery

Here's a common light weight 2032 coincell battery. Great for powering tiny robots, real time clocks and LED throwies!

$0.75 USD


Compact Selectable Switching Power Supply 3-12VDC

What a handy power adapter - 100~240VAC input, and it outputs up to 10 watts, with a selectable voltage from 3 to 12VDC. Complete with a variety of interface plugs!

$14.95 USD



Enhanced 20 pin microcontroller with individual pin control, 64MHz option and additional features including i2c/spi bus support.

$4.50 USD


FTDI Basic Breakout (3.3V)

This is the SparkFun basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and compatible (like the Freeduino SB) boards. 3.3V version.

$13.95 USD


PICAXE-28X2 Shield Base (Kit)

The PICAXE-28X2 shield base has been designed to be compatible with almost all 'shield modules' as used with the Arduino system. This a very affordable project board for PICAXE development!

$17.56 USD


LilyPad Arduino SimpleSnap with LiPoly cell

This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in battery, and button snap connectors!

$29.95 USD


Pololu 3-pack of Small Casters

Small plastic rollers can be handy - better than having your latest robot dragging its butt across the table! These Pololu units are inexpensive, small, and easy to use!

$1.95 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!