Precision Model Resin, Orange-Red,0.5kg/bottle SKU: 61880
Precision Model Resin, Orange-Red,0.5kg/bottle
eSun’s Precision Model resin is an excelllent choice for detailed printing.
Contained in a sturdy metal bottle, eSun Precision Model Resin is an excellent choice for detailed printing. It has a short curing time, no deformation during printing, and is heat-resistant up to 80 degrees.
eSun is a top supplier of 3D printer filament and resin, and we’re happy to be carrying their inventory. They are not some fly-by-night operation; eSun is an active part of the 3D printer community, and you’ll often see them represented at Maker Faires and 3D Printer Expos. We’ve even been to their labs at the Shenzhen University grounds where they develop and test their product.
In short, eSun knows their stuff. We’re extremely happy with the quality and consistency of their material.
- Short Curing Time
- No Deformation During Printing
- Smooth Performance
- High Precision
- Good detail and Clear Outlines
- Heat Resistant up to 80 Degrees
- Wavelength: 405 nm
- Density: 1.13-1.15 g/m^3
- Viscosity: 150-200 25C, MPa*s
- Hardness: 85 Shore D
- Tensile Strength: 335-410 MPa
- Elongation at Break: 12.1 %
- Flexural Strength: 77 MPa
- Flexural Modulus: 2350 MPa
- IZOD Impact Strength: 44 J/m
Please note: Colors may appear to vary slightly due to display differences on your computer hardware.
A customer suggests: “Do not discard the pull-ring plug upon opening! Reuse it while re-sealing the cap!”
|Dimensions||9 × 9 × 24 cm|
Only logged in customers who have purchased this product may leave a review.