eSun 1.75mm PETG filament - 1kg Spool


25.99 USD

eSun's 1.75mm PETG filament is strong and slightly flexible like ABS, while being easy to print like PLA.

Description [Hide]

We're pleased to carry eSun 3D printer filament. Excellent quality, vacuum packed, and on an easy-to-view transparent spool.

eSun is one of the top suppliers of 3D printer filament, and we're happy to be carrying their inventory. They are not some fly-by-night operation; eSun is an active part of the 3D printer community, and you'll often see them represented at Maker Faires and 3D Printer Expos. They take excellent care of the production methods, and each spool comes vacuum sealed in a pouch with moisture-absorbing desiccant.

In short, eSun knows their stuff. We're extremely happy with the quality and consistency of their material.


PETG Features:

  • Higher strength, lower shrinkage and smoother finish than ABS & PLA
  • Combines good strength with ductility, making it a good, tough material for mechanical parts
  • Good chemical resistance
  • Often features a nice, translucent finish
  • Contains UV absorber
  • Good hydrophobicity (doesn't absorb water easily), good for high humidity storage & usage
  • Low shrinkage, allowing non-headed bed printing
  • Almost odourless during printing


  • Base chemistry: Polyethylene terephthalate-1, 4-cyclohexane 2 methyl ester, made from terephthalic acid (PTA), ethylene glycol (EG) and 1, 4-cyclohexane two methanol (CHDM). And a bit of love...
  • Diameter: 1.75mm (+/- 0.5mm tolerance)
  • 1.23g/cm3 density
  • 64°C distortion temperature at 0.45MPa (65psi) stress
  • 20g/10min melt flow index @ 250°C/2.16kg
  • 49Mpa (7100psi) tensile strength
  • 228% elongation before failure
  • 68MPa (9900psi) bend strength
  • 8kJ/cm IZOD impact strength
  • 1kg spools on clear reel
  • Suggested Print parameters:
    • Print temperature 220-260°C
    • Bed heat (optional): 80-90°C
    • Print speed 30-60mm/s
    • Head movement speed 30-60mm/s

You Might Also Like [Hide]


eSun 1.75mm PLA filament - 1kg Spool

eSun's 1.75mm PLA has a huge range of color selections and prints well on unheated beds.

$22.80 USD


eSun 1.75mm PLA+ filament - 1kg Spool

eSun's 1.75mm PLA+ is stronger and tougher than standard PLA filament.

$23.60 USD


eSun 1.75mm PLA filament - 0.5kg Spool

1.75mm PLA 3D printing filament by eSun. PLA is an excellent general purpose filament with a great finish, very rigid and biodegradable.

$15.95 USD


eSun 1.75mm ABS+ filament - 1kg Spool

eSun's 1.75mm ABS+ 3D Printer filament offers less warping than regular ABS filament.

$23.60 USD


eSun 1.75mm PETG filament - Natural - 1kg Spool

1.75mm PETG filament for 3D printing. PETG is a new material that is strong and slightly flexible like ABS while being easy to print like PLA. Unlike other 'natural' materials which are an off white, PETG natural is completely clear.

$25.98 USD


Kossel GT2 Belt, 1M

GT2 Timing Belt, available in 1M increments up to 5M total.

$8.00 USD


Propeller Education Kit - PropStick USB Version

A complete kit with everything you'll need to get started with the 8-cog multi-processing Propeller microcontroller and PE Labs, except a 9V battery

$99.99 USD


SparkFun Pi Wedge (Preassembled)

The Raspberry Pi series of "single board computers" all have a 40-pin GPIO breakout, but it isn't breadboard friendly. Use the Pi Wedge to bring these lines out to your breadboard

$10.95 USD


Grove - LED Strip Driver (mono and RGB)

Use Grove to simplify your project, and in this case, to add LED strip lights. Drives both mono-colour and RGB styles, up to 3A per channel.

$10.69 USD


24" Servo Extension Cable - Male / Female

Universal connectors fit both Futaba and Hi-Tec/JR(S). Male to female. Very flexible, 24" long 22 AWG stranded wire. Black, red, white silicone rubber insulation.

$4.99 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!