"Big Red" Enclosure
60119
8.95
USD
Qty
Price
1
$8.95 ea.
This big, bright red plastic enclosure, that we affectionately call "Big Red", will give your projects the protection (and attention) they deserve. It will also keep your electronics safe and sound indoors or outdoors as it includes a convenient weatherproof seal!
Description [Hide]
This enclosure has plenty of space for gizmos, gadgets, widgets and doohickeys. Throw in Freeduino and/or synapse/xbee modules for outdoors long-range wireless data-recording or monitoring projects. There's a rubber gasket around the inside of the lid which forms a dust and moisture resistant seal when the screws are tightened down. The lid is secured with 6 x 4mm screws (included).
Features & Specs:
- Can be secured to a pole using U-bolts (not included)
- Thickness: ~3mm
- Dimensions: 74x158x90mm
- The mounting flange dimensions: Extend 19mm from either edge with two 50mm-spaced 7mm diameter holes
Documentation [Hide]
- [Schematic]: Dimensional Drawing
You Might Also Like [Hide]
60100
Solarbotics Arduino Freeduino Enclosure (SAFE)
The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.
$9.95 USD
50450
Arduino USB Board (Uno R3)
The Arduino Uno is the all-new replacement for the favourite and popular Arduino Duemilanove. Now shipping R3!
$29.45 USD
45045
Heat Shrink Kit
Never worry about connection breakage again! Use it to reinforce connections, protect devices, and electrically isolate exposed solder joints. A variety of colors are included to color code your signals or just to make things look pretty!
$7.95 USD
$13.95 USD
$14.95 USD
18845
DC Motor + Stepper FeatherWing Add-on For All Feather Boards
A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors).
$19.95 USD
33182
Acrylic Enclosure for the 1014 Interface Kit 0/0/4
Acrylic Enclosure for Phidget Interface Kit (#3802)
$8.50 USD
33173
Acrylic Enclosure for the 1018 Interface Kit 8/8/8
The 3804 Enclosure is designed to protect the PhidgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure.
$8.50 USD
HVJST2
2-pin JST-PH Connector (2.0 mm Pitch)
The 2-pin, 2mm pitch JST connector is often seen on Lithium Polymer (LiPoly) batteries. Use this when you need the board (male) connector, or need to mate to the female connector.
$0.65 USD
29070
Grove - I2C Branch Cable
The Grove system supports networking I2C devices, so connect them together with this linking cable.
$4.20 USD