PCBGrip Kit 50 - Minimalist

52806

99.00 USD
Qty
Price
1
$99.00 ea.

For the most flexibility in assembling electronics, the PCBGrip Master Kit has a full complement of options


Description [Hide]

No matter how big your electronics bench is, it always comes down to the one-square-foot area in front of your chair where you get the work done. PCBGrip is a modular PCB holding and testing system utilizing Openbeam to offer the most flexibility in holding, mounting, adjusting, and...well, gripping your circuit board and electronic parts.

PCBGrip started as a successful Kickstarter campaign, which Solarbotics supported. We're happy to be now carrying the PCBGrip line for our customers too! We're a bit biased about it, as we've been long supporters of the Openbeam aluminum extrusions it uses.

Also, yes, it uses metric hardware, which we're finding to be more and more prevalent in hardware these days. Fortunately, there's so much included in this kit, you have no risk of running short. A beautiful Wera hand driver is included too.

The minimalist kit has just enough parts to be really useful on a budget.

The Minimalist Kit 50 includes:

2 x Spring Head Assembly 
4 x 90° Tee  
4 x Cylinder  
2 x Joining Plate   
2 x Tri Nut   
4 x Alligator Clip, Small  
8 x M3x0.5 Thumb Screw, ⌀14mm Head  
25 x M3x0.5x7mm Thumb Screw, ⌀7mm Head 
25 x M3x0.5x7mm Pan Head Screw  
25 x M3x0.5 Nut  
25 x M3x0.5 Knurled Nut  
25 x M3x0.5x20mm Hex Head Bolt 
4 x Flat Spring    
4 x ⌀3mm x 85mm Rod    
4 x ⌀3mm x 170mm Rod    
2 x ⌀3mm x 340mm Rod 
1 x Case  
1 x Wera 2mm Driver 
OpenBeam (1x 340mm, 2x 270mm)

You Might Also Like [Hide]

44224

OpenBeam 5.5mm Hex Nut Driver

5.5mm hex nut driver for use with the OpenBeam system.

$13.00 USD

13131

Evil Mad Science EggBot Pro

The fully assembled Egg-Bot PRO.

$325.00 USD

60160

Star Controller - 3 Watt RGB Star LED Controller Kit

The larger 3 watt RGB LEDs are very bright and colorful, but if you don't get the power just right - POOF! Now your RGB is R(nothin')B. The Star Controller tames this LED so you can power it up with 5 to 12V and use any regular 5V signal to control each channel.

$22.00 USD

29096

Grove - Starter Kit for Arduino

No doubt the simplest and most flexible no-soldering way to start hacking with Arduino.

$49.90 USD

52710

Kossel GT2 Belt, 1M

GT2 Timing Belt, available in 1M increments up to 5M total.

$8.00 USD

30310

Seeed Raspberry Pi Breakout Board v1.0

The Raspberry Pi Breakout Board for Raspberry Pi is a prototype board that allows you to combine your raspberry pi with other components and modules.

$11.50 USD

M3-PPH-Asst

M3 Cross pan head Machine screws Assortment Kit 350 pcs

M3 Phillips head Machine Screws - assorted kit 350 pcs

$19.95 USD

21064

Male-Female Jumper Wires 300mm (11.8") 22 AWG, 100 Pack

They're like little 30cm (11.8") high-quality extension cables for your breadboard. Actually, they ARE little 30cm high-quality extension cables for your breadboard!

$34.95 USD

21425

PropScope - 2 Channel Oscilloscope

The PropScope is a two-channel oscilloscope that is capable of reading 25 million samples per second with ten bits of resolution over one, two, ten, or twenty volt peak-to-peak waveforms.

$175.00 USD

33173

Acrylic Enclosure for the 1018 Interface Kit 8/8/8

The 3804 Enclosure is designed to protect the PhidgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure.

$8.50 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!