OpenBeam Extrusion 360mm Length


4.25 USD
$4.25 ea.

This is the 'beam' part of 'Open Beam', the central building component for the system.

Description [Hide]

Wow. The OpenBeam Kickstarter really pulled through, and's nice stuff! We invested in the MakerBeam stuff a while back, and it's been great for some tinkering, but this OpenBeam really pours on the utility-sauce!

Designed around metric hardware standards (yeah, seems metric is the way to go with this stuff!), the OpenBeam 1515 extrusion features 4 slots that perfectly capture a M3 hex nut or the head of a M3 hex head cap screw. 

The center hole channel in the beam can also be tapped to accept an M3 screw, for nifty end-mounting applications The channels down each side of the beam are 3mm wide, handy for 3mm acrylic, 1/8" wood. Thinner material like (interestingly enough) standard 0.062" circuit-boards fit nicely into the single thin channel that runs down the center spine. It's a really well thought-out profile, which is sure to see lots of applications in the DIY machine field!

OpenBeam Extrusions are 360x15x15mm (LxWxH)

You Might Also Like [Hide]


OpenBeam M3 Nuts - 100 Pack

100 pack of M3 nuts for use with OpenBeam.

$3.00 USD


OpenBeam Button Head Socket Cap bolts/screws - 100 Pack

100 pack of button head socket cap screws for use with OpenBeam.

$7.00 USD


OpenBeam Extrusion 1000mm Length

This is the 'beam' part of 'Open Beam'. This is the central building component for the system, and is available in both black and silver.

$10.00 USD


OpenBeam L Joining Plate - 2 Pack

L-shaped joining plates for all your OpenBeam creations! This one handily supports 45 & 90 angles.

$2.20 USD


OpenBeam Extrusion 600mm Length

This is the 'beam' part of 'Open Beam', the central building component for the system.

$6.75 USD


PCBGrip Tri Nut Accessory (pairs)

Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem.

$4.60 USD


Kossel Ball Joint Set Kit

These are not repurposed RC Car ball linkages - these are custom engineered delta printer Kossel ball joints!

$65.00 USD


Kossel Carbon Fiber Arm Set

A 6-pack of 3.5mm carbon fiber rods, 262mm long

$17.00 USD


30:1 Mini Metal Gear Motor

Want a small, quick precision metal gear motor?

$15.95 USD


6-Pin Shield Stacking Header

Want to stack more than one shield at a time? Use these instead of standard 6-pin headers to add extra functionality to your shield!

$0.45 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!