OpenBeam Extrusion 270mm Length

52610

3.30 USD
Qty
Price
1
$3.30 ea.

This is the 'beam' part of 'Open Beam', the central building component for the system.


Description [Hide]

Wow. The OpenBeam Kickstarter really pulled through, and ...it's nice stuff! We invested in the MakerBeam stuff a while back, and it's been great for some tinkering, but this OpenBeam really pours on the utility-sauce!

Designed around metric hardware standards (yeah, seems metric is the way to go with this stuff!), the OpenBeam 1515 extrusion features 4 slots that perfectly capture a M3 hex nut or the head of a M3 hex head cap screw. 

The center hole channel in the beam can also be tapped to accept an M3 screw, for nifty end-mounting applications The channels down each side of the beam are 3mm wide, handy for 3mm acrylic, 1/8" wood. Thinner material like (interestingly enough) standard 0.062" circuit-boards fit nicely into the single thin channel that runs down the center spine. It's a really well thought-out profile, which is sure to see lots of applications in the DIY machine field!

These extrusions are precut to 270x15x15mm (LxWxH)

You Might Also Like [Hide]

52640

OpenBeam Button Head Socket Cap bolts/screws - 100 Pack

100 pack of button head socket cap screws for use with OpenBeam.

$7.00 USD

52611

OpenBeam Extrusion 300mm Length

This is the 'beam' part of 'Open Beam', the central building component for the system.

$3.65 USD

52635

OpenBeam M3 Nuts - 100 Pack

100 pack of M3 nuts for use with OpenBeam.

$3.00 USD

52630

OpenBeam L Joining Plate - 2 Pack

L-shaped joining plates for all your OpenBeam creations! This one handily supports 45 & 90 angles.

$2.20 USD

52625

OpenBeam T Joining Plate - 2 Pack

T-shaped joining plates for all your OpenBeam creations!

$2.20 USD

52800

PCBGrip Kit 750 - Master

For the most flexibility in assembling electronics, the PCBGrip Master Kit has a full complement of options.

$290.00 USD

52830

PCBGrip M3x0.5 Knurled Nut (25 pack)

Sometimes, it is the screw needing tightening, sometimes you need to adjust the nut. In which case, use this knurled M3.

$9.85 USD

52714

Brainwave Pro 3-Axis CNC controller For Kossel

The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller.

$149.00 USD

40340

30cm 5-Conductor long 0.1" Molex Cable

Pre-assembled 5-way, 0.1" (2.54mm) pitch Molex connector to bare stripped end cable, 30cm (11.8") long. Ideal for sensor hookups!

$3.00 USD

K CMD

Solarbotics L298 Compact Motor Driver Kit

The L298 motor driver IC is a very popular, but hard to use chip. Our Compact Motor Driver Kit tames this beast, and adds useful functionality!

$13.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!