The PEI sheets used on Lulzbot printer beds are very nice to work with, but can acquire damage over time from prying tools. This is a factory-original replacement.

Description ^[Hide]

Polyetherimide work surfaces are apparently the thang. Sticks well, pretty tough, just a bit expensive. Considering how much polyimide tape and hairspray you may buy to assure good prints, this is a pretty good deal!

When cleaned and heated to the recommended temperatures, your print sticks well, the first time and releases from the heated bed once cooled. This LulzBot Mini PEI sheet measures 170 mm by 170 mm. The additional material in width and length to allow users to trim to fit their product. This will also allow for a perfectly aligned and finished edge to match the functional dimension of 150 mm by 150 mm on the LulzBot Mini.

The PEI sheet comes prepared with a self-adhesive layer already applied to make installation quick and easy.

Parts Included:

PEI Printing Surface
3M adhesive sheet

Specifications:

PEI Sheet Installed Dimensions
PEI Thickness (stock PEI sheet used in production): 10mil (0.010in, 0.254mm)
Adhesive Thickness: 5mil (0.005in, .127mm)
Total Thickness: 15mil (0.015in, 0.381mm)
Width (X) x Length (Y): 6.693in x 6.693in (170mm x 170mm)

RepRap Wiki

Documentation ^[Hide]

[Data Sheet]: active flyer

You Might Also Like ^[Hide]

14485

693ZZ double-shielded bearing, 3x8x4mm

Friction Be Gone! These bearings will let you slide!

$1.00 USD

52620

Steel Linear Rail, 40cm (15.75") length

For moving things in a straight, STRAIGHT line, you need linear rails!

$50.00 USD

14445

GT2 Timing Belt, sold by meter

This belt may not hold your pants up, but it works great with pulleys and pinions! Sold by the meter up to 10M in length! If you want a 5M length, order 5.

$6.00 USD

M3x5mmG

Metric M3 x 5mm long Grub/Set Screw

Don't you hate it when you lose the set screw? Here are replacements!

$0.25 USD

BASPF

Ardweeny Starter Pack

Get started making tiny Arduino projects with the Ardweeny Starter Pack! There's no need to leave your full Arduino board in your project since it's great for prototyping, just drop in an Ardweeny which is about 1/3 the cost and much, much smaller.

$24.90 USD

R7.5M

7.5M Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD

MPin12RA

Male Strip Pins - 12 per (Right Angle)

Male Strip - 12 per Strip, gold flash surface on 0.1" spacing. These are bent over at 90 degrees for edge-wise connections.

$0.23 USD

44164

FX-8804 Hot Tweezer

Working with SMD parts or desoldering keyboards? The FX-8804 hot tweezers make the job simple when mounted to your Hakko FX-888 soldering station.

$186.47 USD

14223

Deans Style T Plug Male Connector

Have a Deans connector on your LiPo battery? Here's the mate!

$1.95 USD

20948

SMTpads-Size3U, 100x100mil Pads

SMT parts are pretty common. This massive 3U size solder protoboard features 100x100mil pads on a large 160x100mm surface. Has ground plane on other side.

$12.99 USD

LulzBot Mini PEI Sheet

52354