Pogo Pin Probe Clip
USD $3.89
This spring-loaded pogo pin clip gives you the flexibility to measure your signals without tying up one of your precious finger support systems.
DESCRIPTION
Holding a multimeter lead or scope probe onto your circuit while taking measurements or adjusting your devices can be difficult, especially if you don't have 3 hands! Luckily, someone had the brilliance to combine a pogo pin with a spring clip to do it for you.
This clip has the strength to stay attached to your PCB, but is gentle enough to not damage any of your delicate circuitry. The pogo pin has a nice round tip to allow of easy connection to most wires/leads of your though hole and surface mount components. Just like the clip, the pogo pin is also springy to allow for adjustment when the clip is being clamped to the PCB.
You could also use this for connecting to batteries, wearables, just about anything where you wish you had a third/fourth/etc hand to hold a probe in place.
Technical Details:
- Max Voltage/Current: 100V / 1A
- Length: 65mm / 2.6"
- Opening: 30mm / 1.2"
- Weight: 6.4g
RESOURCES & DOWNLOADS
Additional information
| Weight | 0.0073 kg |
|---|---|
| Dimensions | 6.5 × 4.5 × 0.8 cm |
REVIEWS
Related products
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.