Pogo Pin Probe Clip SKU: 52260
Pogo Pin Probe Clip
$2.95 USD
This spring-loaded pogo pin clip gives you the flexibility to measure your signals without tying up one of your precious finger support systems.
Available on backorder
Description
Holding a multimeter lead or scope probe onto your circuit while taking measurements or adjusting your devices can be difficult, especially if you don’t have 3 hands! Luckily, someone had the brilliance to combine a pogo pin with a spring clip to do it for you.
This clip has the strength to stay attached to your PCB, but is gentle enough to not damage any of your delicate circuitry. The pogo pin has a nice round tip to allow of easy connection to most wires/leads of your though hole and surface mount components. Just like the clip, the pogo pin is also springy to allow for adjustment when the clip is being clamped to the PCB.
You could also use this for connecting to batteries, wearables, just about anything where you wish you had a third/fourth/etc hand to hold a probe in place.
Technical Details:
- Max Voltage/Current: 100V / 1A
- Length: 65mm / 2.6″
- Opening: 30mm / 1.2″
- Weight: 6.4g
More Info
Weight | 0.0073 kg |
---|---|
Dimensions | 6.5 × 4.5 × 0.8 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
2mm White Sintra
SKU: SIN2mm-WThis 2mm thick 8x12" expanded PVC sheet has excellent robot-building characteristics.$2.85 USDIn stock
Add to cart -
Push Pogo Pin 4 – Cup Tip
SKU: PP4This 33mm (1.3") long cup-tipped pogo pin probe pin is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
50-Series Push Pogo Pin – 4-Sided Point
SKU: PP2-50This smaller, 16.4mm long cone-tipped pogo/probe ping is normally used for electronic JTAG uses, but we use them for bots!$1.50 USDIn stock
Add to cart -
Magnet
SKU: Mag1These 3/4" Neodymium magnets are very strong. Useful for all kinds of Magbot experiments or just holding posters up on metal surfaces as we like to do!$2.75 USDOut of stock
Read more -
AXE Stack-28 Starter Kit (USB)
SKU: 28621Brand new to PICAXE? Here's an all-in-one bundle to get you started from the ground-level using the PICAXE 28 and a USB Cable interface$84.09 USDAvailable on backorder
Add to cart
Reviews
There are no reviews yet.