Digital Thermometer Gauge

52238

This Product Has Been Discountinued, This Page Is For Reference Only.

$7.99

USD

Qty
Price
1
$7.99 ea.

This is a colourful temperature gauge that reads out temperature in Celsius or Fahrenheit (user selectable). The temperature is displayed both in a digital readout and an analog bar graph.


Description [Hide]

This affordable temperature display includes a temp probe and convenient switching between Celsius and Fahrenheit with the blue button. It quickly hooks up to +5V and GND from an ATX power supply Molex connector. You can always hack in your own +5V and GND by splicing into the red and black wires and soldering them to your own supply such as a USB breakout, SLVR-1, 5 Volt Switching regulator, or just a 5V regulator on it's own. We did a few tests and found that this LCD can operate at voltages as low as 2.7V but the backlight is very dim, if you changed the backlight resistor to a lower value you could probably run this display off a couple 'AAA' batteries or a small LiPo!

Specifications

  • Snap-in Black plastic Enclosure
  • Dimensions: 48(mm) X 28(mm), Thickness: 17(mm)
  • Powered by PC ATX power supply with a 4-pin molex connector (only +5V and GND used)
  • Temp Range:  0°Cto 70°C, 32°F to 176°F
  • Accuracy: +/- 1 °C, +/- 1.8°F
  • Cable length: 0.4m
  • Length of temp probe: 0.6m
  • Waterproof temp probe
  • Blue button at the back to switch between °C and °F.
  • Low current consumption Approx: 22mA
  • LCD still operates at voltages as low as 2.7V (though backlight is very dim at lower voltages)

Applications

  • Ambient PC temperature
  • Heat sink monitoring
  • Indoor/Outdoor temperature
  • Liquid temperature
  • Body temperature monitor
  • Soil temperature monitor
  • Can make a Portable temp probe for the positive temperature spectrum

You Might Also Like [Hide]

60530

Wireless RGB LED Strip Controller

Unsure of how to interface RGB strips to your own microcontroller? Why not go with this ready-to-go remote controlled LED controller! Comes with a small remote that allows you to use wireless infrared signals to change the RGB strip color and lighting effects.

$6.50 USD



50450

Arduino USB Board (Uno R3)

The Arduino Uno is the all-new replacement for the favourite and popular Arduino Duemilanove. Now shipping R3!

$29.45 USD



35040

DS18B20+ Temperature Sensor

The DS18B20+ is a handy, 1-wire compatible temperature sensor, ideal for interfacing with the PICAXE!

$4.95 USD



QRD1114

Line Sensor

IR emitter and receiver in one package for close-range optical detection (sold individually)

$1.35 USD



CP0.1uF

0.1µF Monolithic Capacitor

0.1µF monolithic ceramic capacitor with many general purpose electronic applications.

$0.25 USD



51005

QTR-1A Reflectance Sensor (2-Pack)

The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line following applications. This sensor is sold in packs of two units.

$4.25 USD



30310

Seeed Raspberry Pi Breakout Board v1.0

The Raspberry Pi Breakout Board for Raspberry Pi is a prototype board that allows you to combine your raspberry pi with other components and modules.

$11.50 USD



50402

Serial Embedded LCD Backpack

The serial enabled LCD backpack allows you to control a parallel based LCD over a single-wire serial interface.

$16.95 USD



52691

OpenBeam Machinist Precut Kit

Not only does this kit contain the same parts as the OpenBeam Precut Kit 1, it also includes motor mounts and other parts needed for building desktop CNC & 3D machines.

$199.95 USD



17090

16MHz Through-Hole Crystal for Arduino

16.000MHz. That's pretty darn precise. And exactly the value needed to run an ATmega8/168/328 microcontroller at Arduino-compatible frequency!

$0.95 USD



Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!