Infrared Remote Decoder Module with Remote

52221

This Product Has Been Discontinued, This Page Is For Reference Only.

17.59 USD
Qty
Price
1
$17.59 ea.

We've now taken the popular IR decoding module from Sure Electronics and teamed it up with a matching remote all placed into one convenient package!


Description [Hide]

This Infrared Remote Decoder Module can receive and decode wireless infrared transmissions over a 38 kHz carrier wave. It can easily interface to a microcontroller such as an Arduino with only 3 pins (Power, Ground, & TX). Arduino sample decoding program available under Documentation tab.

As an infrared decoder module, besides the included remote this item can be used to decode signals from any remote control which utilizes NEC protocol. Integrating high performance PIC16F690 IC as the decoder makes this module feature high anti-jamming ability and low bit-error rate. Powered by either 5 or 3.3VDC, this module can output signals through either asynchronous serial pin or the parallel pins so that it can be used in various applications like power control, lighting control, volume control, etc.. Via the asynchronous serial pin, this module can also read the code of each key pressed with the help of UART communication software. When the parallel pins are used, up to seven keys of a remote control are supported and you can redefine the relationship of keys and outputs. 

Features:

  • Size: 35.70(L) × 28.14(W) × 12.80(H) ±0.2mm
  • Small sized PCB with 2 mounting holes for #4-40 hardware
  • Supports NEC encoding format over a 38kHz carrier
  • Can use either a +5VDC or +3.3VDC supply
  • Two kinds of signal output: Asynchronous serial (TX) & Parallel (D0, D1, D2)
  • Data from serial port: hexadecimal, address code + command code
  • Excellent design for easy integration in all kinds of systems
  • Save resources and shortens development cycle
  • 8-pin 0.1" spacing Male header included

This module has been tested to receive line of sight transmissions from greater than 35 feet away in an indoor environment. An extra feature of the PCB is that it has a programming header that is compatible with the PICkit 2/3. This board also comes inside a protective 3"(L) X 2.5"(W) X 7/8"(H)  Plastic Parts Box.

Pin definitions:

Pin

Symbol

Description

1

+5V

DC5V supply

2

+3.3V

DC3.3V supply

3

ACT

Signal indication: “1”- key pressed, “0”- no key pressed

4

D2

Parallel output D2

5

D1

Parallel output D1

6

D0

Parallel output D0

7

TX

Asynchronous serial output

8

GND

Ground

Applications:

  • DIY wireless data transmission applications
  • Remote Control Decoding
  • Smart Home Control
  • Volume Control
  • Wireless Robot Control
  • Pratical jokes - Surprise activation!

Note: You can find all the specifications and features of the remote itself here.

Documentation [Hide]

You Might Also Like [Hide]

17442

2.1mm DC Power Plug Short

Yup... It's a DC power plug jack. Exciting stuff.

$1.75 USD

51005

QTR-1A Reflectance Sensor (2-Pack)

The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line following applications. This sensor is sold in packs of two units.

$4.25 USD

18911

Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit

Need to move motors but don't want to use up a lot of pins? Try out the I2C enabled Motorshield from Adafruit.

$19.95 USD

45060

Static Safe Conductive Foam

Static safe foam is a must for anyone who needs to store or transport any kind of an IC.

$3.95 USD

50575

Laser Module Mount

Every laser needs a holder!

$4.95 USD

QRD1114

Line Sensor

IR emitter and receiver in one package for close-range optical detection (sold individually)

$1.35 USD

IR1

Infrared Optical Sensor

These infrared photodiodes are a proven light sensor in BEAM technology.

$1.35 USD

OPB704

OPB704 IR Reflective Object Sensor

The OPB704 IR Reflective Object Sensor is a focused reflect sensor that is used for the detection of changes in a surface. It will save you from ever falling off a cliff! Okay, maybe that's a bit dramatic. It will save your robot from ever falling down the stairs! That's better.

$2.95 USD

33290

PhidgetLED-64 Advanced

The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can be turned on and off, and its brightness controlled.

$125.00 USD

17560

Socket 28-Pin Wide DIP

This socket will seat any 28-pin wide dip IC.

$0.25 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!