Netduino Go Starter Kit

52156

$99.95

USD

Qty
Price
1
$99.95 ea.

Love the Netduino but not a big fan of pulling out the ol' soldering iron when it comes to prototyping with it? The Netduino Go Starter Kit gives users the ability to interface Godbus modules to the Go for quick and easy plug-and-play projects.


Description [Hide]

The Netduino Go Starter Kit is a modular system designed to work with plug and play Netduino GoBus modules. This starter kit even comes with 3 of these modules (RGB LED, potentiometer, & push button) and a Shield base. There are also other kinds of interesting modules available out there like Touchscreens, relays, & Piezo buzzers.

Alongside the Netduino Go, Secret Labs introduces a very cool accessory. It's called the Shield Base. You plug it into your Netduino Go and it provides you with the latest Arduino pinout, 6 PWMs, 6 ADCs, and a handful of GPIOs. To use it, you just create InputPorts, AnalogInputs, etc. using the standard NETMF classes.

The Netduino Shield Base is in  early beta firmware so that Secret Labs can get wide feedback on this new virtualization technology. And to say thank you for beta testing the Shield Base, they've temporarily upgraded its 128KB-flash MCU to a full-blown 512KB-flash 120MHz Cortex-M3 microcontroller. You can connect it to power and a USB-TTL serial cable and use it as a traditional Netduino if you'd like as well -- while enjoying its 3 serial ports and other new enhancements. Both the Netduino Go and the Shield Base run production versions of .NET MF 4.2 QFE1 (RTM).

Netduino Go Features:

  • White power LED
  • Blue user LED
  • Reset button - Can be used as GPIO input
  • STMicro 32-bit microcontroller
  • Speed: 168MHz, Cortex-M4
  • Code Storage: 384 KB
  • RAM: 100+ KB
  • input: USB powered
  • output: 5 VDC and 3.3 VDC switched
  • max current: 300mA @ 5VDC up to 500mA @ 3.3VDC
  • digital i/o are 3.3 V--but 5 V tolerant
  • operating temperature: 0 - 70 °C (32 - 158 °F)
  • RoHS compliant - Pb-free (lead-free)

Shield Base (Beta) features:

  • Arduino R3 compatible headers
  • Digital I/O with pull-ups/downs
  • MOSFET control of 3.3V and 5V power headers to shields
  • Limited time beta, includes NETMF & 512kB flash Microcontroller
  • Mini-JTAG port for programming and debugging
  • 6 PWM channels
  • 12-bit ADC
  • 3 Serial ports (which can be used simultaneously)
  • Large 100uF caps on power rails

Includes:

  • Netduino Go mainboard - with 4 sticky rubber feet
  • Netduino Go Module Shield Base - with 4 sticky rubber feet
  • Netduino Go Button Module
  • Netduino Go Potentiometer Module
  • Netduino Go RGB LED module
  • 4 x Go board-to-board Cables (2 packaged with Go board)
  • 3' microUSB Cable

Resources:

Documentation [Hide]

You Might Also Like [Hide]

50456

Arduino Due

The long awaited ARM board by Arduino is finally here, now you can access higher level functionality while still using the wildly popular Arduino IDE.

$49.95 USD



KARDW

Solarbotics Ardweeny

Looking to build the smallest, handiest, bread-board friendly Arduino-compatible? The Ardweeny fits on the back of the included ATmega328P, taking up no more valuable breadboard space than the microcontroller itself!

$9.95 USD



51875

Arduino Yun

Take a wireless router-on-a-chip, and stick an Arduino Leonardo to it - that's the new Arduino YUN!

$71.95 USD



IR1

Infrared Optical Sensor

These infrared photodiodes are a proven light sensor in BEAM technology.

$1.35 USD



52627

OpenBeam T Joining Plate, Anodized Aluminum - 2 Pack

T-shaped joining plates for all your OpenBeam creations!

$5.20 USD



RM1A

Standard Motor

This "030" form factor motor replaces the old Mabuchi FF-030 we used to stock, and is still a good candidate for torquey Solarengine and small battery-powered robots.

$2.95 USD



52712

Kossel Pulley Set

This is a full pulley set including bearings for the Kossel Pro.

$30.00 USD



RE1

DPDT 5V Relay

This DPDT 5V relay is used for a good many robot projects, usually for motor power routing.

$3.50 USD



R6.2K

6.2k Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD



R430K

430k Resistor

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD



Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!