Wicked Node Kit

52115

This Product Has Been Discountinued, This Page Is For Reference Only.

$15.95 USD
Qty
Price
1
$15.95 ea.

This ATTiny24-based 433MHz platform is a remote sensor base. Add up to 4 sensors (analog or digital), and configure the board's broadcast schedule!


Description [Hide]

If you're looking to do periodic, remote measurements, here's a kit for you! Tie up to 4 sensors to the ATTiny24's 10-bit ADC channels, and have them streamed back to a Wicked Receiver mounted on your Arduino-compatible.

You can schedule your transmissions with three options:

  1. Sensor values are transmitted hourly.
  2. Sensor value are transmitted every 10 minutes. Both these modes are suitable for environmental data (temperature, etc).
  3. Whenever an event is detected, it is transmitted. This is the most power efficient mode, ideal for collecting event based data.

As this is designed for low power battery operated application, the chip "sleeps" most of the time and only wakes up to transmit or when it detects an edge on its digital sensor. You're also able to assign a node ID that is received with the datastream, so you can link multiple remote stations to one base station and keep your data sorted.

It will transmit the number of edges it receives in the hour, up to 255, plus three analog values. Why counted edges? What if you're attaching a simple contact sensor to a door you want to clock how many times is opened? TaDaaah! Simple solution!

Range is up to 300' ideally, but more realistically about half that.

The device features a LP2950 low-drop out voltage regulator, that will ensure solid 5V operation with an overhead as low as 40mV. If you're really concerned about power-consumption, you might want to hack in a small switching power converter.

Full assembly instructions are available.

You Might Also Like [Hide]

Wicked Receiver Shield Kit

52120

Want to do some wireless communication for the Arduino, but on the cheap? The Wicked Devices 433MHz Receiver Shield will give your Arduino-compatible ears!

$11.00 USD


6-Pin Shield Stacking Header

FPin6L-413

Want to stack more than one shield at a time? Use these instead of standard 6-pin headers to add extra functionality to your shield!

$0.45 USD


8-Pin Shield Stacking Header

FPin8L-413

Want to stack more than one shield at a time? Use these instead of standard 6-pin headers to add extra functionality to your shield!

$0.45 USD


Breadboard Jumper Wire Bundle

21035

This 70-piece flexible wire jumper kit is sure to replace your old-style solid-wire jumpers. These are more flexible, robust, and easy to use!

$6.00 USD


DPDT 5V Relay

RE1

This DPDT 5V relay is used for a good many robot projects, usually for motor power routing.

$3.50 USD


Phidgets Sensor Cable 60

14150

Use this 60cm/24" sensor cable to plug in your Phidgets sensor to the Interface Kit 8/8/8.

$2.05 USD


Gas Sensor Breakout Board

50824

Simple breakout board for the SparkFun MQ-3, MQ-4, MQ-6 and MQ-7 gas sensors. 

$0.95 USD


3.2 dBi 1/2 Wave Dipole RP-SMA Antenna

51762

If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!

$6.00 USD


91k Resistor

R91K

5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.

$0.20 USD


0.1µF Monolithic Capacitor

CP0.1uF

0.1µF monolithic ceramic capacitor with many general purpose electronic applications.

$0.25 USD


Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!