Teensy 4.1 Microcontroller SKU: 52075
Teensy 4.1 Microcontroller
$26.85 USD
Teensy 4.0 is pretty much a Teensy 3.2 with 13X greater performance, as it features a 600MHz ARM M7 processor!
Available on backorder
Description
Featuring the (presently) fastest microcontroller on the market, Teensy 4.1 more than quadruples the performance of the Teensy 3.6, and more than 6x faster than an ESP32, and still is Arduino IDE-compatible! In comparison to the Teensy 4.0, the 4.1 breaks out more peripherals and adds an easy to use USB header.
As usual, PJRC has broken out a great many features to this chipset:
- ARM Cortex-M7 32-bit Processor @ 600MHz
- 1024K RAM
- 4096k FLASH (64k reserved)
- 2 x USB ports at 480MBit/S (really? REALLY? USB that fast on a micro? Wow…)
- 3 x CAN Bus (1 with FD)
- 2 x I²S Digital Audio
- 1 x S/PDIF Digital Audio
- 1 x SDIO native SD (4 bit)
- 3 x I²C with 4-byte FIFO
- 7x Serial with 4-byte FIFO
- 32 x general purpose DMA channels
- 31 x PWM pins (remember having only 4 on an Uno?)
- 40 x Digital I/O pins all interrupt capable
- 14 x Analog pins, with 2 ADCs (on chip)
- Cryptographic Acceleration
- Random Number Generator
- Real-Time Clock
- Programmable FlexIO
- Pixel processing pipeline
- Peripheral cross triggering
- Ethernet PHY
- MicroSD Card Socket
- Power On/Off management
Power consumption is also very manageable, being about 100mA in normal operation. Additionally, it supports dynamic clock scaling while maintaining proper timing across the peripherals. Serial and sampling rates work properly as you scale the CPU speed.
More Info
Weight | 0.008 kg |
---|---|
Dimensions | 8 × 6 × 0.5 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Magnet
SKU: Mag1These 3/4" Neodymium magnets are very strong. Useful for all kinds of Magbot experiments or just holding posters up on metal surfaces as we like to do!$2.75 USDOut of stock
Read more -
Push Pogo Pin – Cone Tip
SKU: PP12-100This 33mm (1.3") long cone tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
Solarbotics Stamp Stack II Microcontroller Kit
SKU: 25030The HVW Technologies' Stamp Stack II is a bread-board friendly, abuse-tolerant, Parallax BS2 100% compatible microcontroller.$35.00 USDIn stock
Add to cart -
AXE Stack-18 Starter Kit (USB)
SKU: 28631Brand new to PICAXE? Here's an all-in-one bundle to get you started with the PICAXE-18X from the ground-level!$62.82 USDIn stock
Add to cart -
Push Pogo Pin 6 – 6 Point
SKU: PP6This 33mm (1.3") long 6-groove tipped pogo pin probe is normally used for electronic JTAG uses, but we used them for bots!$1.25 USDIn stock
Add to cart
Reviews
There are no reviews yet.