Synapse RF300PD1 with SMA Connector

51774

$38.60

USD

Qty
Price
1
$38.60 ea.

A module that runs at OTA (Over-The-Air) speeds up to 150Kbps and has a maximum transmission range of 3 miles! Perfect for when you need a separate frequency band when already using 2.4GHz nodes in an application. Just apply power and you've connected a mesh network.


Description [Hide]

Synapse Wireless provides reliable RF Engines®that support a range of frequencies and bandwidths. These small, low-power, transceiver modules, commonly run in the 915MHz & 2.4GHz spectrums, have a maximum extended range of up to three miles LOS (Line-Of-Sight) and the lowest power consumption in the industry. These RF Engines come pre-loaded with the SNAP® network operating system which allows the nodes to be natively mesh networked. Typical applications include wireless serial port(s), sensor monitoring, actuator control, or an intelligent embedded controller - the possibilities are limitless. Synapse takes 802.15.4 Zigbee/XBee style communication one step further, and makes it smart.

This particular RF module includes a user programmable (via python-based scripts) embedded Silicon Labs Si1000 microcontroller that can be programmed for all kinds of applications including remote sensor monitoring, radio control, and/or peripheral activation.  Other notable features include: large transmission distance (3 mile LOS outdoors), wide Low voltage TTL operating range (1.8 - 3.6V), 12 Analog-to-Digital Inputs, 4 Interrupt capable pins, I2C (TWI), SPI, 1 UART, & amazingly low power capabilities (8uA sleep current).

915MHz SMA antenna is not included but can be purchased from other vendors.

Feature List:

  • RF100 footprint compatible, pinout differs
  • Embedded Si1000 on-board
  • 1 UART port for LVTTL serial control or transparent data
  • Socket-able (2mm spacing) or solder-able
  • SNAP, instant-on, self-healing, mesh network operating system
  • 802.15.4 Protocol at 915 MHz
  • Maximum Range of 3 mile LOS outdoors at 150Kbps with SMA antenna
  • 24 pins, with 15 general purpose I/O, 12 of which can be 10-bit A/D inputs
  • 3 Interrupt capable pins
  • I2C communication (Pins 2, 3)
  • SPI communication (Pins 6, 7, 8)
  • 192k flash memory (64k available for user applications)
  • Embedded Python
  • Low power mode of
  • Can be used stand-alone (no additional microcontroller required)
  • Supply voltage: 2.7V~3.6V
  • Transmit Current: 85mA (Typ)
  • Receive Current: 18.5mA
  • Sleep Current: 8uA
  • Frequency Hopping (FHSS) technology resists noisy environments

Datasheet for RF300PD1:

We added a handy Synapse Module Comparison Chart, click on thumbnail to view a pdf:

 

 

 

 

 

 

 

Documentation [Hide]

Related Products [Hide]

39250

Solarbotics Synapse-to-FTDI Adapter Kit

This board can do it all - breakout the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.

$22.95 USD



51762

3.2 dBi 1/2 Wave Dipole RP-SMA Antenna

If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!

$6.00 USD



39252

Solarbotics Synapse-XBee Adapter Kit

Ever want to change the species of your RF modules? Now you can evolve your XBees into Synapses! Well that doesn't really make sense but, hey, it doesn't change the fact that you can now do it with this kit!

$7.50 USD



51768

Synapse RF200PD1 with SMA Connector

Better than XBee at a comparable cost! This module features the powerful ATmega128RFA1, transmitting on 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 4.8km (3 miles) range and an SMA antenna connector for optimum performance.

$25.00 USD



FPin12-2mm

Female 12-pin Header-2mm Spacing

Female Socket Strip - 12 per Strip, gold flash pin surfacing, 2mm spacing. These pins are perfect for interfacing to our Synapse RF engines!

$1.00 USD



51754

Synapse ProtoBoard (w/o module)

The SN171 Synapse ProtoBoard is a very convenient way to connect any Synapse SNAP module to a RS232 port - ideal for playing with your new RF Engine!

$46.00 USD



50225

AnyVolt Micro Universal DC-DC Converter

The AnyVolt DC-DC converter is small, powerful, and very useful for applications needing efficient voltage switching. The guys as Dimension Engineering know their stuff!

$19.99 USD



45060

Static Safe (Conductive) Foam

Static safe foam is a must for anyone who needs to store or transport any kind of an IC.

$3.95 USD



44210

Replacement Sponge

Looking for a Replacement Sponge? The Replacement Sponge is a replacement sponge for the Hakko 888 Solder Station. Order your Replacement Sponge online now!

$4.95 USD



44130

Hakko Replacement Tip 1.2

The Hakko Replacement Tip 1.2 is a high quality replacement tip for the Hakko 888 or 936 solder station.

$7.95 USD



Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!