Discontinued - RF100P86 Synapse Std Range Mesh wi Antenna

51753

This Product Has Been Discontinued, This Page Is For Reference Only.

24.00 USD
Qty
Price
1
$24.00 ea.

Looking for 802.15.4 ZigBee-type module with smarts? XBee with more features? Check out Synapse modules! Small, low-power, 2.4 GHz plug-in transmitter-receiver modules, with an extended range up to three miles and power consumption as low as 2.5uA.


Description [Hide]

The Synapse Wireless SNAP wireless data solution is the latest in intelligent wireless communication modules. Synapse takes 802.15.4 Zigbee/XBee style communication one step further, and makes it smart.

Synapse modules are microcontroller-based, and designed to inherently mesh together. The SNAP software lets you access every node in the network from a single point (base-station/microcontroller/PC equipped with module), and as they already have a microcontroller, these can be used stand-alone!

The modules themselves are reprogrammable, and use embedded Python as their programming language. These modules even make available the extra I/O, analog-to-digital converters and timers! These are smart 802.15.4-based modules!

Features:

  • Model RF100P86
  • Standard Range version, with integrated "F" PCB antenna
  • Maximum range performance: 1000ft Indoor range; three mile outdoor range (LOS)
  • 24 pins, with 19 general purpose I/O, 8 of which can be 10-bit A/D inputs
  • 2 UART ports (for control or transparent data communication)
  • 60k flash memory (20k available for user applications)
  • Embedded Python
  • Can be used stand-alone (no additional microcontroller required)
  • Low power mode of 2.5 μA with internal timer running
  • Supply voltage: 2.7V~3.4V
  • Transmit Current: 110mA (Typ)
  • Receive Current: 65mA
  • Idle Current: 15mA
  • Sleep Current: 2.5µA
  • Socketable on 2mm spacing
  • 33.86mm x 33.86mm (1.333" x 1.333") overall dimensions
  • FCC certified on all 16 channels (2.4GHz)
  • Spread spectrum (DSSS) technology resists noisy environments

 

Pin No.NameDirectionDescription
1 GND - Power Supply/Return
2 GPIO0_TPM1CH2 Bidirectional GPI/O, or Timer1 Channel 2 (PWM)
3 GPIO1_KBI0 Bidirectional GPI/O, Keyboard In
4 GPIO2_KBI1 Bidirectional GPI/O, Keyboard In
5 GPIO3_RX_UART0 Input UART0 Data In
6 GPIO4_TX_UART0 Output UART0 Data Out
7 GPIO5_KBI4_CTS0 Bidirectional GPI/O, Keyboard In, or UART0 CTS
8 GPIO6_KBI5_RTS0 Bidirectional GPI/O, Keyboard In, or UART0 RTS
9 GPIO7_RX_UART1 Input UART1 Data In
       
10 GPIO8_TX_UART1 Output UART1 Data Out
11 GPIO9_KBI6_CTS1 Bidirectional GPI/O, Keyboard In, or UART1_CTS
12 GPIO10_KBI7_RTS1 Bidirectional GPI/O, Keyboard In, or UART1_RTS
13 GPIO11_AD7 Bidirectional GPI/O, or Analog In
14 GPIO12_AD6 Bidirectional GPI/O, or Analog In
15 GPIO13_AD5 Bidirectional GPI/O, or Analog In
16 GPIO14_AD4 Bidirectional GPI/O, or Analog In
17 GPIO15_AD3 Bidirectional GPI/O, or Analog In
18 GPIO16_AD2 Bidirectional GPI/O, or Analog In
       
19 GPIO17_AD1 Bidirectional GPI/O, or Analog In
20 GPIO18_AD0 Bidirectional GPI/O, or Analog In
21 VCC - Power Supply
22 Reserved - -
23 RESET_L Bidirectional Module Reset, Active Low
24 GND - Power Supply/Return

Synapse's standard schpeal regarding their IEEE 802.15.4 RF module:

A small, low-power, 2.4 GHz plug-in transmitter-receiver module with an extended range up to three miles and power consumption as low as 2.5 uA. The RF Engine Modules come loaded with the Synapse SNAP network stack and will immediately integrate into the network and start routing signals from other nodes. Typical applications include a wireless serial port, sensor monitoring, actuator control, or an intelligent embedded controller - the possibilities are limitless. Synapse RF Engine modules can be used in conjunction with off-the-shelf SNAP nodes or to power custom wireless nodes that have been developed by third-parties such as the end-user

Documentation [Hide]

You Might Also Like [Hide]

39250

Solarbotics Synapse-to-FTDI Adapter Kit

This board can do it all - breakout the Synapse RF module pins, give you a USB port/FTDI chip to program, supply it with a regulated 3.3V, integrate a reset switch (for updating & erasing), and also give you mounting options.

$22.95 USD

MPin12-2mm

2mm Pin Strip Single Row Header - 12 per

Male Strip - 12 per Strip, gold flash on 2mm spacing

$1.00 USD

FPin12-2mm

Female 12-pin Header-2mm Spacing

Female Socket Strip - 12 per Strip, gold flash pin surfacing, 2mm spacing. These pins are perfect for interfacing to our Synapse RF engines!

$1.00 USD

17185

LM1084 5V 5A LDO Voltage Regulator

The LM1084IT-5.0 is a beast of a +5V voltage regulator! Spawning from the same family as the LM317 (sharing the same pinout), this regulator takes current limitations to a whole new level. Perfect for powering servos and handling the load they generate up to 5A!

$3.55 USD

K SV-PICAXE

Solarbotics Sumovore PICAXE Brainboard

Looking for a more flexibility out of your Sumovore, but you're not too up on programming? The PICAXE is a PIC-based solution, programmable with flowcharts - and we've added it to the Sumovore!

$29.95 USD

35185

Parallax PIR Motion Sensor (Rev B)

Check out this awesome PIR Motion Sensor, complete with infrared goodness!

$12.99 USD

TSSP4038

Infrared Receiver 2.5-5.5V 38kHz

Compact IR Receiver for sensor applications.

$1.40 USD

Mag1

Magnet

These 3/4" Neodymium magnets are very strong. Useful for all kinds of Magbot experiments or just holding posters up on metal surfaces as we like to do!

$2.75 USD

60114

Clear Acrylic Lid for the S.A.F.E.

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now you can buy a clear lid separately.

$2.95 USD

18936

Adafruit PowerBoost 500c - Rechargeable

Get your 5V out of a single 3.7V LiPoly / LiIon cells at a MINIMUM of 500mA. Recharge while drawing power on-the-fly.

$15.95 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!