XBee-PRO Module - 60mW Chip Antenna


This Product Has Been Discontinued, This Page Is For Reference Only.

38.45 USD
$38.45 ea.

The low-power XBee 802.15.4 and extended-range XBee-PRO 802.15.4 use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

Description [Hide]

The XBee-Pro series borrows from the excellent "Series 1" units, but now offers a schwackload of range! These 2.4GHz communication modules also take the the 802.15.4 stack and wrap it with a tasty, easy-to-use serial interface command set. 

This particular model is the "XBee-PRO 802.15.4" (formerly Series 1) part XBP24-ACI-001, and features:

  • 63 mW built-in chip antenna
  • 63 mW output (but the chip antenna designation kinda gives that away already, huh?)
  • 250kbps communication speed
  • 3.3V @ 50mA power consumption
  • 1.6kM (1 mile) range (line-of sight, which is pretty darn good!)
  • 6 10-bit ADC input pins
  • 8 digital I/O pins
  • 128-bit encryption
  • Uses standard AT or API command sets
  • Industrial temperature rating (-40° C to 85° C), so feel free to use it in your hot-tub in Iceland.
  • FCC certified for USA, Canada, Australia, & Europe. No worries about men in antenna-laden vans driving up to your house with a "you've been naughty" look on their faces.

Documentation [Hide]

You Might Also Like [Hide]


1k Single-Turn Trimpot with Knob

Handy single-turn 1k trimpot with friendly knob is prototyping friendly!

$2.35 USD


3.2 dBi 1/2 Wave Dipole RP-SMA Antenna

If you're going to use a RF module that needs an SMA antenna, we've got you covered! Here's a 152mm swivel/tilt whip with RP-SMA connector!

$6.00 USD


Freeduino SB-Protoshield

The Freeduino SB-Protoshield offers handy 4-switch / 4-LED / Servo / XBee prototyping space for your Arduino / Freeduino SB.

$12.50 USD


XBee Connector Pack

Includes all the components you need to plug the XBee Board into your Make Controller, and interface with sensors and actuators directly.

$8.00 USD


FX-8804 Hot Tweezer

Working with SMD parts or desoldering keyboards? The FX-8804 hot tweezers make the job simple when mounted to your Hakko FX-888 soldering station.

$186.47 USD


OPB704 IR Reflective Object Sensor

The OPB704 IR Reflective Object Sensor is a focused reflect sensor that is used for the detection of changes in a surface. It will save you from ever falling off a cliff! Okay, maybe that's a bit dramatic. It will save your robot from ever falling down the stairs! That's better.

$2.95 USD


ChipQuik SMD Removal Kit

ChipQuik is a powerful desoldering tool that makes removing even the smallest surface mount package a breeze.

$15.95 USD


Serial Embedded LCD Backpack

The serial enabled LCD backpack allows you to control a parallel based LCD over a single-wire serial interface.

$16.95 USD


PIC 16F628A-20/P

Small, powerful, inexpensive - PIC Micros from Microchip are an easy and affordable way to get into microcontrollers.

$3.95 USD


Synapse RF200P81 with Chip Antenna

XBee is good; Synapse is just better. More I/O, embedded python, and generally better range at comparable cost! This particular module is 2.4GHz with OTA (Over-The-Air) speeds up to 2Mbps, maximum 450M (1500') range and a chip antenna for compact installation.

$23.95 USD





Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!