Didel Module 0.3 Gears - 9-Tooth pinion, 0.97mm bore for 1mm shaft
Didel Module 0.3 Gears - 9 Teeth pinion, 0.61mm bore (4mm short pagers)
Didel Module 0.3 Gears - 12-tooth pinion, 0.97mm bore for 1mm shaft
Didel Module 0.3 Gears - 81/12-tooth spur, 0.78mm ID
Didel Module 0.3 Gears - 9 tooth pinion, 0.71mm bore for 4mm pagers. Measures 3.55 x 3.20 x 3.20mm
1.75mm 0.5kg spool of bronze powder infused PLA filament, not recommended for nozzle sizes under 0.3mm. Probably a good idea to get some cleaning filament too.
Don't you hate it when you lose the set screw? Here are replacements!
Parallax makes the Arduino BoEBot-Friendly!
This is similar to other 16x2 character LCDs that you've seen before but with one vibrant difference: The backlight is actually an RGB LED.
5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.
This little number is an interface board for any BS2-compatible or Stamp Stack II controller, it is intended for use with products that were designed to accept Solarbotics add-on brainboards such as the Sumovore and ScoutWalker III.
Forgot Your Password?
Don't Have an Account?Sign Up!