» Motors & Servos » Accessories
Didel Module 0.3 Gears - 9 tooth pinion, 0.71mm bore for 4mm pagers. Measures 3.55 x 3.20 x 3.20mm
Didel Module 0.3 Gears - 9 tooth pinion, 0.71mm bore for shafts usually found on 4mm diameter pagers. Measures 3.55 x 3.20 x 3.20mm
Didel Module 0.3 Gears - 9 Teeth pinion, 0.61mm bore (4mm short pagers)
Didel Module 0.3 Gears - 9-tooth pinion, 0.81mm bore, for 6mm and several 7 mm pagers. Measures 4.47 x 3.14 x 3.14mm.
Didel Module 0.3 Gears - 12-tooth pinion, 0.97mm bore for 1mm shaft
Didel Module 0.3 Gears - 81/12-tooth spur, 0.78mm ID
Didel Module 0.3 Gears - 36/12-tooth spur, 0.69mm ID
The Secret L293D motor driver kit replaces the guts of a standard servo and turns it into tidy gear motor with a built in motor driver!
Looking for a good continuous-rotation servo? The Grand-Wing Servo GSV0008A is a well proven unit!
A simple, low-cost, high quality servo for all your mechatronic needs.
Want to lock down heavier gauge wires down semi-permanent fashion? Here's a 2-position terminal block with 0.137" (3.5mm) spacing.
These are small 1/8" square clear-epoxy encapsulated solar cells generating about 1/2 volt @ 1.9mA in sunlight.
Forgot Your Password?
Don't Have an Account?Sign Up!