LilyPad Slide Switch
50838
3.95
USD
Qty
Price
1
$3.95 ea.
2+
$3.56 ea.
This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc.
Description [Hide]
This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. As part of the LilyPad system, it's another handy wear-as-you-go fashion techsessory!
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!
Dimensions:
- 7.75x18.1mm
- Thin 0.8mm PCB
Documentation [Hide]
- [Schematic]: LilyPad Button Schematic
You Might Also Like [Hide]
50485
LilyPad Coin Cell Battery Holder
If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick.
$4.95 USD
50837
LilyPad Bright White LED
A simple, very bright, 250mcd, white LED LilyPad. Light up the night! With your shirt (or anything else you sew it to!)
$3.95 USD
50468
LilyPad Button Board
Part of the LilyPad wearable electronics system, this board gives the user a discrete, non-sharp button interface
$1.50 USD
50471
Conductive Thread - 50'
Conductive thread is a creative way to connect various electronics onto clothing.
$3.72 USD
60375
Solarbotics Repairacord™ Bracelet - Armoured
It's a Survival Bracelet... for geeks. Armoured full protects the wire.
$18.93 USD
60370
Solarbotics Repairacord™ Bracelet - Hybrid
It's a Survival Bracelet... for geeks. Hybrid has both cord and wire woven together.
$17.41 USD
60365
Solarbotics Repairacord™ Bracelet - All wire
It's a Survival Bracelet... for geeks. All-wire is the most compact.
$15.14 USD
50489
LilyPad Arduino SimpleSnap with LiPoly cell
This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in battery, and button snap connectors!
$7.49 USD
60852
eSun 1.75mm HIPS filament - Black - 1kg Spool
1.75mm HIPS filament for 3D printing. HIPS is an excellent general purpose filament with high strength and a small amount of flexibility, and less prone to warp than ABS.
$30.00 USD
25122
Spin Stamp Microcontroller
This spin stamp microcontroller has the same kind of form as the 24-pin BS2 modules. Please note that holding this module while on a spinny-ride will not decrease dizziness.
$49.95 USD